EAST HANOVER, NJ —
OSHA Inspection: SANDYSTON CONSTRUCTION CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SANDYSTON CONSTRUCTION CORPORATION in 180 ROUTE 10, EAST HANOVER, NJ 07936 (NAICS 238140). OSHA activity number 343187134.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SANDYSTON CONSTRUCTION CORPORATION
- Site address
- 180 ROUTE 10
- City
- EAST HANOVER
- State
- NJ
- ZIP
- 07936
- Mailing
- 183 ROUTE 206 S, SANDYSTON, NJ 07826
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 15
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.451 B01
- Issued
- Aug 15, 2018
- Penalty
- Initial $5,174 · Current $2,587 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Platform(s) on all working levels of scaffolds, were not fully planked or decked between the front uprights and guardrail supports. Location: Cube Smart Route 10, East Hanover, NJ. a) An employee involved in masonry operations inside stair tower B of the project was working from a tubular welded scaffold that was not fully planked at the working level. The employee was exposed to a potential fall hazard of up to approximately 20 ft. to the lower level; on or about 5/24/18.
Recent events (2)
- — I (S) $2587
- — Z (S) $5174
1926.451 F06
- Issued
- Aug 15, 2018
- Penalty
- Initial $5,174 · Current $2,587 Reduced
General-duty citation text
29 CFR 1926.451(f)(6): Scaffolds were erected, used, dismantled, altered, or moved such that they, or any conductive material handled on them, could have come closer than the minimum distances established for specific voltages as set forth in the table in subparagraph (f)(6).Note: Specify distances as indicated in table in paragraph (f)(6) of this section. Location: Cube Smart Route 10, East Hanover, NJ. a) Employer erected a tubular welded scaffold within 6 ft. of a 7.2 Kv and a 12.5 Kv power lines thereby exposing workers/users to electrical safety hazards; on or about 5/24/18.
Recent events (2)
- — I (S) $2587
- — Z (S) $5174
1926.451 G01
- Issued
- Aug 15, 2018
- Penalty
- Initial $5,174 · Current $2,587 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level. Location: Cube Smart Route 10, East Hanover, NJ. a) Employer allowed his employee, whom had a harness; to work from a scaffold approximately 24 feet from the ground below without tying off the lanyard to the life line and/or fall protection system that was in place; on or about 5/24/18.
Recent events (2)
- — I (S) $2587
- — Z (S) $5174
More inspections at Sandyston Construction Corporation
View Sandyston Construction Corporation's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343187134.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.