CONROE, TX —
OSHA Inspection: AMERITEX PIPE & PRODUCTS, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of AMERITEX PIPE & PRODUCTS, LLC in 8489 WAUKEGAN ROAD, CONROE, TX 77306 (NAICS 327332). OSHA activity number 343194262.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AMERITEX PIPE & PRODUCTS, LLC
- Site address
- 8489 WAUKEGAN ROAD
- City
- CONROE
- State
- TX
- ZIP
- 77306
- Mailing
- 8489 WAUKEGAN RD., CONROE, TX 77306
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327332
- Employees
- 100
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.140 C10 I
- Issued
- Nov 13, 2018
- Abate by
- Nov 19, 2018
- Penalty
- Initial $6,467 · Current $3,234 Reduced
General-duty citation text
29 CFR 1910.140(c)(10)(i): The employer did not ensure that snaphooks and carabiners were not connected directly to webbing, rope, or wire ropes: On or about May 31, 2018 in the fabrication area, employees were exposed to fall hazards when working on concrete pipes and culverts with a snaphook connected directly to the webbing of a lanyard.
Recent events (2)
- — I (S) $3233.5
- — Z (S) $6467
1910.140 D02 II
- Issued
- Nov 13, 2018
- Abate by
- Dec 3, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.140(d)(2)(ii): The employer did not ensure that personal fall arrest systems were rigged in such a manner that the employee cannot free fall more than 6 feet (1.8 m) or contact a lower level. On or about May 31, 2018 in the fabrication area, employees were exposed to fall hazards when working on concrete pipes and culverts with fall protection that was not set up in a way that would prevent an employee from striking a lower level or the ground.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 C01
- Issued
- Nov 13, 2018
- Abate by
- Feb 1, 2019
- Penalty
- Initial $6,467 · Current $3,234 Reduced
General-duty citation text
29 CFR 1910.146(c)(1): The employer did not evaluate the workplace to determine if any spaces were permit-required confined spaces. On or about May 31, 2018 in the fabrication area, employees were exposed to struck-by hazards while cleaning an underground concrete form area and concrete mixers without evaluating the space to determine if they were permit required confined spaces.
Recent events (2)
- — I (S) $3233.5
- — Z (S) $6467
1910.146 C02
- Issued
- Nov 13, 2018
- Abate by
- Dec 3, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(c)(2): The employer did not inform exposed employees, by posting danger signs or by any other equally effective means, of the existence and location of and the danger posed by the permit spaces. On or about May 31, 2018 in the fabrication area of the facility where employees were exposed to struck-by hazards when working in an underground concrete form area, and around concrete mixers without danger or other equally effective means posted of the permit space.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 C04
- Issued
- Nov 13, 2018
- Abate by
- Feb 1, 2019
- Penalty
- Initial $6,467 · Current $3,234 Reduced
General-duty citation text
29 CFR 1910.146(c)(4): When the employer decided that its employees would enter permit spaces, the employer did not develop and implement a written permit space entry program that complied with 29 CFR 1910.146: On or about May 31, 2018 in the mixer area, employees were exposed to struck-by hazards while cleaning the concrete mixers without the employer having a confined space program.
Recent events (2)
- — I (S) $3233.5
- — Z (S) $6467
1910.147 C04 II B
- Issued
- Nov 13, 2018
- Abate by
- Feb 1, 2019
- Penalty
- Initial $6,467 · Current $3,234 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. On or about May 31, 2018, on the RP and Variant lines, employees were exposed to struck-by and caught-in hazards when performing cleaning tasks on machinery without having clear and specific procedures to control hazardous energy.
Recent events (2)
- — I (S) $3233.5
- — Z (S) $6467
1910.147 C06 I
- Issued
- Nov 13, 2018
- Abate by
- Dec 3, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed. On or about May 31, 2018, at the facility where employees were exposed to struck-by and caught-in hazards when performing cleaning tasks when the energy control procedures were not reviewed annually.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 C02 I
- Issued
- Nov 13, 2018
- Abate by
- Dec 3, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible. On or about May 31, 2018 employees were wearing filtering face piece respirators without being provided information contained in Appendix D to 29 CFR 1910.134.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 327332)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343194262.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.