MADISON, MS —
OSHA Inspection: IRON INNOVATIONS, INC
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of IRON INNOVATIONS, INC in 129 KATHERINE POINTE DRIVE, MADISON, MS 39110 (NAICS 332323). OSHA activity number 343197745.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- IRON INNOVATIONS, INC
- Site address
- 129 KATHERINE POINTE DRIVE
- City
- MADISON
- State
- MS
- ZIP
- 39110
- Mailing
- 1101 CLINTON INDUSTRIAL PARK RD, CLINTON, MS 39056
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332323
- Employees
- 13
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.21 B02
- Issued
- Nov 7, 2018
- Abate by
- Dec 4, 2018
- Penalty
- Initial $12,934 · Current $9,000 Reduced
General-duty citation text
29 CFR 1926.21(b)(2): The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury. (a) Katherine Pointe - On or about May 26, 2018 the employer did not train employee on the hazards associated with working on or near high voltage.
Recent events (2)
- — I (S) $9000
- — Z (S) $12934
1926.417 A
- Issued
- Nov 7, 2018
- Abate by
- Nov 16, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.417(a): Controls. Controls that are to be deactivated during the course of work on energized or deenergized equipment or circuits shall be tagged. (a) Katherine Pointe - On or about May 26, 2018 employer failed to protect workers from electrical shock when an employee was allowed to work on an Elite Gate Operator control panel circuit that was not de-energized and tagged.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.39 A01
- Issued
- Nov 7, 2018
- Abate by
- Nov 9, 2018
- Penalty
- Initial $3,696 · Current $1,800 Reduced
General-duty citation text
29 CFR 1904.39(a)(1): Basic Requirement. Within eight (8) hours after the death of any employee as a result of a work-related incident, you must report the fatality to the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor. (a) Iron Innovation, Inc. - On or about May 26, 2018 the employer did not report a work related fatality to OSHA within 8 hours. The employer reported the death on May 29, 2018.
Recent events (2)
- — I (O) $1800
- — Z (O) $3696
1910.134 C02 I
- Issued
- Nov 7, 2018
- Abate by
- Nov 9, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: (a) Iron Innovation, Inc. - On or about May 30, 2018 the employer did not develop and implement a written respirator program. Employer did not provide fit testing or training to his employees prior to allowing them use respirators.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 E01
- Issued
- Nov 7, 2018
- Abate by
- Nov 9, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program which at included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): (Construction Reference: 1926.59) (a) Iron Innovation, Inc. - On or about May 30, 2018 the employer did not develop and implement a Hazardous Communication Program. Employees were allowed to use oxygen and acetylene without Hazardous Communication Training.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Iron Innovations, INC
View Iron Innovations, INC's full OSHA safety record →
More inspections in this industry (NAICS 332323)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343197745.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.