SYRACUSE, NY —
OSHA Inspection: ALLIED DECORATION CO., INC. DBA ALLIED SIGN CO.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of ALLIED DECORATION CO., INC. DBA ALLIED SIGN CO. in 720 ERIE BLVD WEST, SYRACUSE, NY 13204 (NAICS 339950). OSHA activity number 343200903.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALLIED DECORATION CO., INC. DBA ALLIED SIGN CO.
- Site address
- 720 ERIE BLVD WEST
- City
- SYRACUSE
- State
- NY
- ZIP
- 13204
- Mailing
- 720 ERIE BLVD WEST, SYRACUSE, NY 13204
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339950
- Employees
- 10
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.107 E06 I
- Issued
- Jun 20, 2018
- Penalty
- Initial $1,201 · Current $781 Reduced
General-duty citation text
29 CFR 1910.106(e)(6)(i): Adequate precautions against the ignition of flammable vapors were not taken: a) Spray Booth Area, on or about 6/8/18: AllPro Lacquer Thinner was being used without grounding the 5 gallon container.
Recent events (2)
- — I (S) $780.65
- — Z (S) $1201
1910.213 C01
- Issued
- Jun 20, 2018
- Abate by
- Aug 10, 2018
- Penalty
- Initial $1,885 · Current $1,225 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) Plastic Shop, on or about 6/8/18: Delta Table Saw was not guarded by an automatic adjusting hood that completely enclosed the portion of the saw blade above the table and above the material being cut.
Recent events (2)
- — I (S) $1225.25
- — Z (S) $1885
1910.213 H01
- Issued
- Jun 20, 2018
- Abate by
- Aug 10, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material being cut: a) Saw Bench, on or about 6/8/18: DeWalt Radial Arm Saw had no lower blade guards on either side of the blade. b) Saw Bench, on or about 6/18/18: Skil Radial Arm Saw Model No. 450 had no lower blade guards on either side of blade.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 H04
- Issued
- Jun 20, 2018
- Abate by
- Aug 10, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator: a) Saw Bench, on or about 6/8/18: DeWalt Radial Arm Saw did not return to the starting position when released. b) Saw Bench, on or about 6/8/18: Skil Radial Arm Saw Model No. 450 did not return to the starting position when released
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 G02 I
- Issued
- Jun 20, 2018
- Penalty
- Initial $1,201 · Current $781 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets or other forms of approved enclosures, or other means listed under this provision: a) Upper Shop, on or about 6/8/18: A 120 volt breaker panel box had two blanks missing.
Recent events (2)
- — I (S) $780.65
- — Z (S) $1201
More inspections at Allied Decoration CO., INC. DBA Allied Sign CO.
View Allied Decoration CO., INC. DBA Allied Sign CO.'s full OSHA safety record →
More inspections in this industry (NAICS 339950)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343200903.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.