MANHATTAN, MT —
OSHA Inspection: DANHOF CHEVROLET, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DANHOF CHEVROLET, INC. in 6605 AMSTERDAM ROAD, MANHATTAN, MT 59741 (NAICS 441110). OSHA activity number 343202511.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DANHOF CHEVROLET, INC.
- Site address
- 6605 AMSTERDAM ROAD
- City
- MANHATTAN
- State
- MT
- ZIP
- 59741
- Mailing
- 6605 AMSTERDAM ROAD, MANHATTAN, MT 59741
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 441110
- Employees
- 18
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Jun 28, 2018
- Abate by
- Aug 24, 2018
- Penalty
- Initial $2,956 · Current $2,956
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Danhof Chevrolet, Inc. Auto Repair Shop: On or about June 4, 2018 and at times prior employees were exposed to struck by hazards while using the 17 1/2 Ton OTC hydraulic shop press. b) Danhof Chevrolet, Inc. Auto Repair Shop: On or about June 4, 2018 and at times prior employees were exposed to struck by and caught in hazards while using the Accu-turn brake lathe.
Recent events (2)
- — I (O) $2956
- — Z (S) $2956
1910.253 B02 II
- Issued
- Jun 28, 2018
- Abate by
- Jul 25, 2018
- Penalty
- Initial $2,217 · Current $0 Reduced
General-duty citation text
29 CFR 1910.253(b)(2)(ii): Inside of buildings, cylinders were not stored in a well-protected, well-ventilated, dry location, at least 20 feet (6.1 m) from highly combustible materials such as oil or excelsior: a) Danhof Chevrolet, Inc. Automotive Repair Shop: On or about June 4, 2018 and at times prior the employer failed to ensure that the acetylene and oxygen cylinders were stored at least 20 feet apart.
Recent events (2)
- — I (S) $0
- — Z (S) $2217
1910.244 A01 II
- Issued
- Jun 28, 2018
- Abate by
- Jul 25, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.244(a)(1)(ii): Rated load(s) of portable jack(s) were not legibly and permanently marked in a prominent location on the jack(s) by casting, stamping, or other suitable means: a) Danhof Chevrolet, Inc. Auto Repair Shop: On or about June 4, 2018 and at times prior the employer failed to ensure the engine hoist was labeled with a legible load rating.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 G01 I A
- Issued
- Jun 28, 2018
- Abate by
- Jul 25, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(i)(A): For electric equipment operating at 600 volts, nominal, or less to ground, and likely to require examination, adjustment, servicing, or maintenance while energized, the depth of the working space in the direction of access to live parts (as measured from the live parts where they were exposed or from the enclosure front or opening where they were enclosed) was less than indicated in Table S-1 of Subpart S of Part 1910: a) Danhof Chevrolet, Inc. Automotive Repair Shop, South Electrical Panel: On or about June 4, 2018 and at times prior the employer failed to ensure that the 120 Volt electrical panel maintained a 3 foot clear working space in front of the electrical panel. b) Danhof Chevrolet, Inc. Automotive Repair Shop, North Electrical Panel: On or about June 4, 2018 and at times prior the employer failed to ensure that the 120 Volt electrical panel maintained a 3 foot clear working space in front of the electrical panel.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Danhof Chevrolet, INC.
View Danhof Chevrolet, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 441110)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343202511.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.