INVERNESS, IL —
OSHA Inspection: ABP REMODELING INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ABP REMODELING INC. in 160 BRAYMORE COURT, INVERNESS, IL 60010 (NAICS 238160). OSHA activity number 343207254.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ABP REMODELING INC.
- Site address
- 160 BRAYMORE COURT
- City
- INVERNESS
- State
- IL
- ZIP
- 60010
- Mailing
- 825 VILLAGE QUARTER ROAD #A4, WEST DUNDEE, IL 60118
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1903.19 C01
- Issued
- Oct 25, 2018
- Abate by
- Nov 29, 2018
- Penalty
- Initial $311 · Current $311
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: ABP Remodeling Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected: Citation Number Item Number Abatement Date 01 01 08/22/2018 01 02 08/22/2018 01 03 08/22/2018 In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF THE CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- — Z (O) $311
1926.102 A01
- Issued
- Aug 16, 2018
- Abate by
- Aug 22, 2018
- Penalty
- Initial $2,217 · Current $2,217
General-duty citation text
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents: a) On or about June 5, 2018, employees were exposed to eye injury while operating pneumatic nail guns without the eye protection during roofing work. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- — Z (S) $2217
1926.300 B02
- Issued
- Aug 16, 2018
- Abate by
- Aug 22, 2018
- Penalty
- Initial $2,772 · Current $2,772
General-duty citation text
29 CFR 1926.300(b)(2): Moving part(s) of equipment exposed to contact by employees or which otherwise created a hazard, were not guarded: a) On or about June 5, 2018, employees were exposed to rotating parts on a gas operated hoist motor where the recoil assembly guard was detached from the unit. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- — Z (S) $2772
1926.501 B13
- Issued
- Aug 16, 2018
- Abate by
- Aug 22, 2018
- Penalty
- Initial $3,880 · Current $3,880
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b): a) On or about June 5, 2018, employees were exposed to the hazard of falling from a while performing roofing work from a first story roof having a ground to eave height of approximately 12 feet. b) On or about June 5, 2018, employees were exposed to the hazard of falling from a while performing roofing work from a second story roof having a ground to eave height of approximately 21 feet. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- — Z (S) $3880
1926.1053 B01
- Issued
- Aug 16, 2018
- Penalty
- Initial $2,217 · Current $2,217
General-duty citation text
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed: a) On or about June 5, 2018, employees were exposed to the hazard of falling from an elevation of approximately 12 feet where a portable extension ladder provided for roof access and egress did not extend at least 3 feet above the landing surface of the roof deck. No abatement certification or documentation required for this violation.
Recent events (1)
- — Z (S) $2217
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343207254.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.