GIBSONIA, PA —
OSHA Inspection: BON TOOL CO.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of BON TOOL CO. in 4430 GIBSONIA ROAD, GIBSONIA, PA 15044 (NAICS 332216). OSHA activity number 343213096.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BON TOOL CO.
- Site address
- 4430 GIBSONIA ROAD
- City
- GIBSONIA
- State
- PA
- ZIP
- 15044
- Mailing
- 4430 GIBSONIA ROAD, GIBSONIA, PA 15044
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332216
- Employees
- 50
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.107 B05 I
- Issued
- Aug 9, 2018
- Abate by
- Sep 5, 2018
- Penalty
- Initial $5,174 · Current $3,363 Reduced
General-duty citation text
29 CFR 1910.107(b)(5)(i): Visible gauges or audible alarms or pressure activated devices were not installed to indicate or insure that the required air velocity is maintained: a) At the facility, on or about June 21, 2018 - A visible gauge or audible alarm or pressure activated devices were not installed to ensure the required air velocity was maintained. Employees spray Rust-Oleum American Accents Primer and Paint, a flammable, inside of the spray booth.
Recent events (2)
- — I (S) $3363.1
- — Z (S) $5174
1910.107 B05 IV
- Issued
- Aug 9, 2018
- Abate by
- Oct 1, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(b)(5)(iv): Space within the spray booth on the downstream and upstream sides of filters were not protected with approved automatic sprinklers: a) At the facility, on or about June 21, 2018 - The spray booth was not equipped with automatic sprinklers on the downstream and upstream sides of the filters. Employees spray Rust-Oleum American Accents Primer and Paint, a flammable, inside of the spray booth.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.107 B10
- Issued
- Aug 9, 2018
- Abate by
- Sep 5, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(b)(10): Transparent panels used for illumination of spray booth(s) did not effectively isolate the spraying area from the area in which the lighting unit(s) were located: a) At the facility on or about June 21, 2018 - Transparent panels used for illumination of the spray booth did not effectively isolate the spraying area from the area in which the lighting was located. Employees spray Rust-Oleum American Accents Primer and Paint containing Acetone, a flammable, inside of the spray booth.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.107 C02
- Issued
- Aug 9, 2018
- Abate by
- Sep 5, 2018
- Penalty
- Initial $3,880 · Current $2,522 Reduced
General-duty citation text
29 CFR 1910.107(c)(2): Open flame or spark producing equipment was located in the spraying area or within 20 feet thereof, and was not separated by a partition. a) At the facility on or about June 21, 2018 - Spark producing equipment was located within 20 feet of the spaying area and was not separated by a partition. A halogen work light was located approximately 6 feet from the spray booth. Employees spray Rust-Oleum American Accents Primer and Paint containing Acetone, a flammable, inside of the spray booth.
Recent events (2)
- — I (S) $2522
- — Z (S) $3880
1910.134 C02 I
- Issued
- Aug 9, 2018
- Abate by
- Sep 5, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: a) At the facility, on or about June 21, 2018 - Employees were not provided with the information contained in Appendix D of 29 CFR 1910.134 when the employer determined voluntary respirator use was permissible. Employees voluntarily wear 3M N-95 filtering face piece respirators during welding operations.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at BON Tool CO.
View BON Tool CO.'s full OSHA safety record →
More inspections in this industry (NAICS 332216)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343213096.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.