Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ACCRO-MET, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ACCRO-MET, INC. in 29 KRIPES ROAD, SUITE E, EAST GRANBY, CT 06026 (NAICS 423510). OSHA activity number 343219739.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Accro-Met, INC. — free Get an email when a new federal OSHA severe-injury report for Accro-Met, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
ACCRO-MET, INC.
Site address
29 KRIPES ROAD, SUITE E
City
EAST GRANBY
State
CT
ZIP
06026
Mailing
29 KRIPES ROAD, SUITE E, EAST GRANBY, CT 06026
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423510
Employees
3
Ownership type
A

5 citations on file for this inspection.

1910.26 C

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 5, 2018
Penalty
Initial $1,885 · Current $1,320 Reduced
29 CFR 1910.26(c): Portable dockboards were not secured by anchoring them in place nor by using equipment or devices that prevented the dockboard from moving out of a safe position:     Shop:  On, or about, June 12, 2018, the pins used to secure the dockboard in place when in use could not be located.
Recent events (2)
  • — I (S) $1319.5
  • — Z (S) $1885

1910.26 E

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 5, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.26(e): Portable dockboards were not equipped with handholds or other means to permit safe handling of dockboards:     Shop:  On, or about, June 12, 2018, the handhold provided on the dockboard was damaged.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L01 I

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 5, 2018
Penalty
Initial $2,956 · Current $2,069 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  Shop:  On, or about, June 12, 2018, employees who operated powered industrial trucks had not been provided with training.
Recent events (2)
  • — I (S) $2069.2
  • — Z (S) $2956

1910.212 A01

Serious Gravity 5 2 instances 2 exposed
Issued
Jul 5, 2018
Penalty
Initial $3,696 · Current $2,587 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:      Shop:  On, or about, June 12, 2018, adequate guarding was not provided on the following machines:  A.  Cosen horizontal band saw, Model C-320NC:  No guard provided on the unused portion of the blade. B.   Amada horizontal band saw, Model HFA-250W:  No guard provided on the auger-type chip collector.
Recent events (2)
  • — I (S) $2587.2
  • — Z (S) $3696

1910.303 B02

Other-than-serious 1 instance 2 exposed
Issued
Jul 5, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:   Shop:  A extension cord that was rated for 13 amperes was used to energize a Skilsaw miter saw that was rated at 15 amperes.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Accro-Met, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343219739.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.