CULDESAC, ID —
OSHA Inspection: CLEARWATER SEED, L.L.C.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CLEARWATER SEED, L.L.C. in 27999 S MAINSTREET, CULDESAC, ID 83524 (NAICS 424910). OSHA activity number 343229415.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CLEARWATER SEED, L.L.C.
- Site address
- 27999 S MAINSTREET
- City
- CULDESAC
- State
- ID
- ZIP
- 83524
- Mailing
- 827 W. 1ST AVE SUITE 307, SPOKANE, WA 99201
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424910
- Employees
- 21
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.146 D02
- Issued
- Jul 5, 2018
- Abate by
- Jul 31, 2018
- Penalty
- Initial $5,174 · Current $5,174
General-duty citation text
29 CFR 1910.146(d)(2): Under the permit-required confined space program required by 29 CFR 1910.146(c)(4), the employer did not identify and evaluate the hazards of permit spaces before employees entered: (a) Pellet Silo.: On or about June 13, 2018 and at times prior, employees entered a silo to shovel feed pellets toward an auger in the floor. Note: Abatement certification and documentation is required for this item.
Recent events (2)
- — I (S) $5174
- — Z (S) $5174
1910.146 D03
- Issued
- Jul 5, 2018
- Abate by
- Jul 31, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(d)(3): Under the permit-required confined space program required by 29 CFR 1910.146(c)(4), the employer did not develop and implement the means, procedures, and practices necessary for safe permit space entry operations, including, but not limited to items (3)(i) through (3)(vi) of this paragraph: (a) Pellet Silo.: On or about June 13, 2018 and at times prior, employees entered a silo to shovel feed pellets toward an auger in the floor. Note: Abatement certification and documentation is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Jul 5, 2018
- Abate by
- Jul 31, 2018
- Penalty
- Initial $5,174 · Current $5,174
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) Pellet Silo.: On or about June 13, 2018 and at times prior, employees entered a silo to shovel feed pellets toward an rotating auger in the floor. Note: Abatement certification and documentation is required for this item.
Recent events (2)
- — I (S) $5174
- — Z (S) $5174
1910.219 E01 I
- Issued
- Jul 5, 2018
- Abate by
- Jul 31, 2018
- Penalty
- Initial $5,174 · Current $2,592 Reduced
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): (a) Pelletizer: On or about June 13, 2018 and at times prior, employees operate the pelletizer while exposed to a rotating belt driven pulley. Note: Abatement certification and documentation is required for this item.
Recent events (2)
- — I (S) $2592
- — Z (S) $5174
1910.219 F03
- Issued
- Jul 5, 2018
- Abate by
- Jul 31, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: (a) Pellet Cooler: On or about June 13, 2018 and at times prior, employees operate the pellet cooler while exposed to a rotating sprockets and chain. (a) Hammer Mill: On or about June 13, 2018 and at times prior, employees operate the hammer mill while exposed to a rotating sprockets and chain. Note: Abatement certification and documentation is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 424910)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343229415.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.