Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MOBILE STORAGE INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of MOBILE STORAGE INC. in 81 PILSUDSKI STREET, PROVIDENCE, RI 02909 (NAICS 493110). OSHA activity number 343232849.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mobile Storage INC. — free Get an email when a new federal OSHA severe-injury report for Mobile Storage INC. is published. One employer, no account, unsubscribe in one click.
Establishment
MOBILE STORAGE INC.
Site address
81 PILSUDSKI STREET
City
PROVIDENCE
State
RI
ZIP
02909
Mailing
81 PILSUDSKI STREET, PROVIDENCE, RI 02909
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
493110
Employees
10
Ownership type
A

5 citations on file for this inspection.

1910.178 L06

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 25, 2018
Abate by
Sep 30, 2018
Penalty
Initial $1,663 · Current $1,164 Reduced
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):    (a) Worksite:  On or about 6/18/2018, the employer did not ensure that forklift operators were trained, evaluated and certified to operate forklifts as required to perform their job duties.
Recent events (2)
  • — I (S) $1164
  • — Z (S) $1663

1910.215 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 25, 2018
Penalty
Initial $3,880 · Current $2,716 Reduced
29 CFR 1910.215(a)(1): Abrasive wheel(s) used on grinding machinery were not used with safety guard(s):    (a) Worksite:  On or about 6/18/2018, the employer did not ensure that all hand-held grinders were properly guarded to protect employees from the rotating abrasive wheel.
Recent events (2)
  • — I (S) $2716
  • — Z (S) $3880

1910.1200 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 25, 2018
Abate by
Sep 30, 2018
Penalty
Initial $2,217 · Current $1,552 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    (a) Worksite:  On or about 6/18/2018, the employer had not developed a hazard communication program, nor had the employer trained employees on the hazards associated with the chemical products they use.
Recent events (2)
  • — I (S) $1552
  • — Z (S) $2217

1910.132 D02

Other-than-serious 1 instance 2 exposed
Issued
Jun 25, 2018
Abate by
Sep 30, 2018
Penalty
Initial $311 · Current $0 Reduced
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification which included the requirements as outlined in 29 CFR 1910.132(d)(2):    (a) Worksite:  On or about 6/18/2018, the employer had not performed a hazard assessment of the workplace to determine what types and levels of personal protective equipment should be required for the protection of employees.
Recent events (2)
  • — I (O) $0
  • — Z (O) $311

1910.305 G01 IV B

Other-than-serious 1 instance 2 exposed
Issued
Jun 25, 2018
Abate by
Sep 30, 2018
Penalty
Initial $311 · Current $0 Reduced
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and/or cables were run through holes in walls, ceilings, or floors:    (a) Worksite:  On or about 6/18/2018, the employer allowed a flexible power cord to be passed through a small hole in a wall that separated two workshops, so employees could use the longer extension cord to power various tools in the shop area.
Recent events (2)
  • — I (O) $0
  • — Z (O) $311

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343232849.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.