Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MILTON DIAZ

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MILTON DIAZ in BROWNFIELD CHURCH OF CHRIST, 502 LUBBOCK ROAD, BROWNFIELD, TX 79316 (NAICS 238160). OSHA activity number 343238861.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Milton Diaz — free Get an email when a new federal OSHA severe-injury report for Milton Diaz is published. One employer, no account, unsubscribe in one click.
Establishment
MILTON DIAZ
Site address
BROWNFIELD CHURCH OF CHRIST, 502 LUBBOCK ROAD
City
BROWNFIELD
State
TX
ZIP
79316
Mailing
5520 58TH STREET #236, LUBBOCK, TX 79414
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
5
Ownership type
A

6 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 5 exposed
Issued
Oct 15, 2018
Abate by
Nov 8, 2018
Penalty
Initial $2,772 · Current $1,000 Reduced
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical agents.     On or about June 19, 2018, employer did not ensure employees engaged in roofing operations wore personal protective equipment such as safety glasses while operating nail guns.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2772

1926.501 B01

Serious Gravity 10 1 instance 5 exposed
Issued
Oct 15, 2018
Abate by
Nov 8, 2018
Penalty
Initial $3,880 · Current $1,600 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.    On or about June 19, 2018, employer did not ensure employees engaged in roofing work in excess of six feet were provided fall protection.
Recent events (2)
  • — I (S) $1600
  • — Z (S) $3880

1926.503 A01

Serious Gravity 10 1 instance 5 exposed
Issued
Oct 15, 2018
Abate by
Nov 8, 2018
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  On or about June 19, 2018, employees had not been trained to recognize hazards related to falls and the procedures to follow that would minimize those hazards while performing roofing activities, at a height of over 6 feet, without fall protection.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1053 B01

Serious Gravity 5 1 instance 5 exposed
Issued
Oct 15, 2018
Abate by
Nov 8, 2018
Penalty
Initial $2,217 · Current $1,054 Reduced
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:    On or about June 19, 2018, employees engaged in roofing work using a ladder that did not extend at least three feet above the roof's landing.
Recent events (2)
  • — I (S) $1054
  • — Z (S) $2217

1926.1053 B06

Serious Gravity 5 1 instance 5 exposed
Issued
Oct 15, 2018
Abate by
Nov 8, 2018
Penalty
Initial $0 · Current $0
29 CFR 1926.1053(b)(6): Ladders were not used only on stable and level surfaces unless secured to prevent accidental displacement:   On or about June 19, 2018, the employer did not ensure ladders used to gain access to the roof were secured.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1060 A

Serious Gravity 1 1 instance 5 exposed
Issued
Oct 15, 2018
Abate by
Nov 8, 2018
Penalty
Initial $0 · Current $0
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards.  On or about June 19, 2018, employees using a ladder to gain access to the roof while engaged in roofing activities had not been trained to recognize hazards related to ladders and the procedures to follow that would minimize the hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343238861.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.