EAST TROY, WI —
OSHA Inspection: ACCURATE HOUSING SYSTEMS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ACCURATE HOUSING SYSTEMS, INC. in 2624 CORPORATE CIRCLE, EAST TROY, WI 53120 (NAICS 321214). OSHA activity number 343239521.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ACCURATE HOUSING SYSTEMS, INC.
- Site address
- 2624 CORPORATE CIRCLE
- City
- EAST TROY
- State
- WI
- ZIP
- 53120
- Mailing
- 2624 CORPORATE CIRCLE, EAST TROY, WI 53120
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321214
- Employees
- 95
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.22 A01
- Issued
- Aug 3, 2018
- Abate by
- Aug 17, 2018
- Penalty
- Initial $6,467 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms and walking-working surfaces were not kept clean, orderly and in sanitary condition: On or about June 20, 2018 upper elevations around the bevel saw had an accumulation of combustible wood dust.
Recent events (2)
- — I (O) $0
- — Z (S) $6467
1910.212 A01
- Issued
- Aug 3, 2018
- Abate by
- Aug 13, 2018
- Penalty
- Initial $6,467 · Current $4,527 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about June 19, 2018 the employer did not ensure that the interlock on the miter saw, model Omni Miser II serial number OM2K7090012, was operational guarding employees from the point of operation.
Recent events (2)
- — I (S) $4526.9
- — Z (S) $6467
1910.303 B02
- Issued
- Aug 3, 2018
- Abate by
- Aug 13, 2018
- Penalty
- Initial $6,467 · Current $4,527 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled equipment was not installed and used in accordance with any instructions included in the listing and labeling: On or about June 20, 2018 listed or labeled relocatable power tap (power strip) was not used or installed in accordance with instructions included in the listing or labeling, in that it was used to power a chop saw and industrial fan while connected to an extension cord.
Recent events (2)
- — I (S) $4526.9
- — Z (S) $6467
1910.304 G05
- Issued
- Aug 3, 2018
- Abate by
- Aug 13, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: On or about June 20, 2018 the grounding path for the industrial fan located near the web saw was not continuous.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Accurate Housing Systems, INC.
View Accurate Housing Systems, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321214)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343239521.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.