OSHA Inspection: MARIPOSA LABS LLC

Issued

2018-07-09 00:00:00

Penalty

Initial $3298.00 · Current $2309.00 Reduced

General-duty citation text

29 CFR 1910.212(b):  Machines designed for a fixed location were not securely anchored to prevent walking or moving.  a) On or about June 26, 2018 or prior thereto, Production Area:  Low pressure steam tank #6 was not anchored.  b) On or about June 26, 2018 or prior thereto, Production Area:  Low pressure steam tank #7 was not anchored.  c) On or about June 26, 2018 or prior thereto, Production Area:  Low pressure steam tank #9 was not anchored.  d) On or about June 26, 2018 or prior thereto, Production Area:  Low pressure steam tank #10 was not anchored.  NOTE:  Abatement certification is NOT required for this item.

Issued

2018-07-09 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.  a) On or about June 26, 2018, or prior thereto:   The employer had not completed a certified personal protective equipment assessment.    Eye and face protection are required in the Production Area, Packaging, and the QA Lab.  NOTE:  Abatement certification is NOT required for this item.

Issued

2018-07-09 00:00:00

Abate by

2018-08-23 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.  a) On or about June 26, 2018 or prior thereto:   A periodic inspection of the employer's energy control procedures had not been completed.   Lockout procedures have been conducted on Tank #3 in Production, and the Oden Filler.   Pneumatic and electrical lockouts have been performed.  NOTE:   Abatement certification IS required for this item.

Issued

2018-07-09 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance had not been conducted at least once every three years.  a) On or about June 26, 2018 or prior thereto:  Employees operate Crown Powered Industrial Trucks Model RC 3020-40, Serial Number 1A243806; and Model 35RCTT, Serial Number 1A159538.   Employee operators were not trained at least once every three years.  NOTE:  Abatement certification is NOT required for this item.