Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MORABITO BAKING CO., INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of MORABITO BAKING CO., INC. in 757 KOHN STREET, NORRISTOWN, PA 19401 (NAICS 311812). OSHA activity number 343267399.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Morabito Baking CO., INC. — free Get an email when a new federal OSHA severe-injury report for Morabito Baking CO., INC. is published. One employer, no account, unsubscribe in one click.
Site address
757 KOHN STREET
City
NORRISTOWN
State
PA
ZIP
19401
Mailing
757 KOHN STREET, NORRISTOWN, PA 19401
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311812
Employees
120
Ownership type
A

7 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 1 instance 10 exposed
Issued
Oct 10, 2018
Abate by
Dec 7, 2018
Penalty
Initial $7,068 · Current $4,500 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    a) Production Work Area: On or about June 25, 2018, employees were conducting maintenance and servicing work on equipment with multiple sources of energy, but the employer had not yet developed machine specific procedures to ensure each energy source was effectively controlled.
Recent events (2)
  • — I (S) $4500
  • — Z (S) $7068

1910.147 C07 I

Serious Gravity 5 1 instance 20 exposed
Issued
Oct 10, 2018
Abate by
Dec 7, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees:    a) Production Work Area: On or about June 25, 2018, employees were conducting maintenance and servicing work on equipment with multiple sources of energy, but the employer had not provided training on the energy control program to ensure the employees possessed the knowledge and skills for safe energy control application.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 F03

Serious Gravity 5 2 instances 10 exposed
Issued
Oct 10, 2018
Penalty
Initial $7,068 · Current $4,500 Reduced
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed:    a) Production Work Area, String Line Machine Work Area:  On or about June 25, 2018, employees operated or worked around the String Line Machine with an unguarded chain and multiple sprockets.
Recent events (2)
  • — I (S) $4500
  • — Z (S) $7068

1910.305 B01 II

Serious Gravity 5 1 instance 20 exposed
Issued
Oct 10, 2018
Penalty
Initial $5,654 · Current $4,500 Reduced
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:     a) Production Work Area, String Line Machine Work Area, Along the Back Wall:  On or about June 25, 2018, employees were using a single throw safety switch box to control the power to production equipment prior to the application of energy control hardware where an opening existed in the outer box.
Recent events (2)
  • — I (S) $4500
  • — Z (S) $5654

1910.305 G01 IV A

Serious Gravity 5 1 instance 20 exposed
Issued
Oct 10, 2018
Penalty
Initial $5,654 · Current $4,500 Reduced
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:    a) Production Work Area, Roll Oven Discharge Area:  On or about June 25, 2018, a lighting unit used on an industrial oven was powered by a damaged flexible cord in place of a fixed receptacle.
Recent events (2)
  • — I (S) $4500
  • — Z (S) $5654

1904.39 A02

Deleted Other-than-serious 1 instance 20 exposed
Issued
Oct 10, 2018
Penalty
Initial $7,068 · Current $0 Reduced
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye.  a) Production Work Area: On or about June 23, 2018, an employee was hospitalized after a work-related incident, but the employee's amputation was not reported to OSHA until June 25, 2018.
Recent events (2)
  • — I (O) $0
  • — Z (O) $7068

1910.37 A03

Other-than-serious 1 instance 15 exposed
Issued
Oct 10, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:  a) Production Work Area, Industrial Oven Work Area:  On or about June 25, 2018, an exit route was obstructed with multiple stacks of baking pans.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Morabito Baking CO., INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343267399.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.