BRIDGEPORT, CT —
OSHA Inspection: PARK CITY PACKAGING, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of PARK CITY PACKAGING, INC. in 1069 CONNECTICUT AVE., BRIDGEPORT, CT 06607 (NAICS 561910). OSHA activity number 343279642.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PARK CITY PACKAGING, INC.
- Site address
- 1069 CONNECTICUT AVE.
- City
- BRIDGEPORT
- State
- CT
- ZIP
- 06607
- Mailing
- 1069 CONNECTICUT AVE., BRIDGEPORT, CT 06607
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561910
- Employees
- 30
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C01
- Issued
- Dec 28, 2018
- Abate by
- Feb 1, 2019
- Penalty
- Initial $9,054 · Current $6,300 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: Facility: The employer had not established and implemented a site specific hazardous energy control lockout/tagout program consisting of machine specific written step-by-step energy control procedures, employee training, and periodic inspection for the employees during servicing and maintenance of equipment, such as (but not limited to) the Entwistle, Rite-size, corrugated box machine.
Recent events (2)
- — I (S) $6300
- — Z (S) $9054
1910.147 C04 I
- Issued
- Dec 28, 2018
- Abate by
- Mar 29, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. Facility: The employer had not established and implemented written step-by-step energy control procedures in the machine specific, including alternative measures for the employees during servicing and maintenance of equipment, such as (but not limited to) the Entwistle, Rite-size, corrugated box machine. On or about July 3, 2018, an employee sustained an amputation of two fingers on his right hand on a chain and sprocket while reaching inside the machine to clear a piece of cardboard that was jammed in the machine without locking out the machine. The employee was able to reach into an area where a chain and sprocket were only partially covered by a guard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Dec 28, 2018
- Abate by
- Mar 29, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control device(s): Facility: The employees, as "authorized, affected and other" types were not provided with training and information in the controlling of potentially hazardous and unexpected release of energy sources (lo/to) during servicing and maintenance of equipment, such as (but not limited to) the Entwistle, Rite-size, corrugated box machine. On or about July 3, 2018, an employee sustained an amputation of two fingers on his right hand on a chain and sprocket while reaching inside the machine to clear a piece of cardboard that was jammed in the machine without locking out the machine. The employee was able to reach into an area where a chain and sprocket were only partially covered by a guard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Park City Packaging, INC.
View Park City Packaging, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 561910)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343279642.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.