CASTILE, NY —
OSHA Inspection: UPSTATE DOOR, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of UPSTATE DOOR, INC. in 5701 EAST RAILROAD STREET, CASTILE, NY 14427 (NAICS 321911). OSHA activity number 343283115.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UPSTATE DOOR, INC.
- Site address
- 5701 EAST RAILROAD STREET
- City
- CASTILE
- State
- NY
- ZIP
- 14427
- Mailing
- 26 INDUSTRIAL STREET, WARSAW, NY 14569
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321911
- Employees
- 20
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- Sep 7, 2018
- Penalty
- Initial $6,467 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about 07/10/18 at the Castile location; employees were exposed to amputation hazards when changing the blades on the rail end shaper # 12 in the Shaping and Boring department when the employer did not enforce the use of the written LOTO procedures during these activities which included attaching a lock to the local disconnect. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $0
- — C (S) $6467
- — Z (S) $6467
1910.147 D04
- Issued
- Sep 7, 2018
- Penalty
- Initial $0 · Current $4,000
General-duty citation text
29 CFR 1910.147(d)(4): A lockout device was not attached to all power sources: a) On or about 07/10/18 at the Castile location; employees were exposed to amputation hazards when changing the blades on the rail end shaper # 12 in the Shaping and Boring department when the employer did not enforce attaching a lock to the disconnect, located near the ceiling of the department, for this equipment prior to performing these service and maintenance activities. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $4000
- — C (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Sep 7, 2018
- Abate by
- Oct 10, 2018
- Penalty
- Initial $6,467 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) On or about 07/10/18 at the Rough Mill department located in Castile, NY; employees who used the pop up saw were exposed to amputation hazards when the guard extended 13 inches from at the point of operation with an opening of 7 inches and allowed access to the saw blade during operation. ABATEMENT DOCUMENTATION REQUIRED
Recent events (3)
- — J (O) $0
- — C (S) $6467
- — Z (S) $6467
1910.213 M01
- Issued
- Sep 7, 2018
- Abate by
- Oct 10, 2018
- Penalty
- Initial $9,054 · Current $6,000 Reduced
General-duty citation text
29 CFR 1910.213(m)(1): Cutting heads of wood shaper(s) were not enclosed with an adjustable guard so designed so as to keep the operator's hand away from the cutting edge: a) On or about 07/06/18 at the Castlle facility; while shaping a piece of wood on the #12 shaper employee was exposed to an amputation hazard when the blade was exposed and an adjustable guard was not used. ABATEMENT DOCUMENTATION REQUIRED
Recent events (3)
- — J (S) $6000
- — C (S) $9054
- — Z (S) $9054
1904.39 A02
- Issued
- Sep 7, 2018
- Penalty
- Initial $6,467 · Current $0 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. a) On or about 07/10/18 at Upstate Door, Inc., Castile, NY; an amputation injury occurred on 07/06/18, was known by the employer on the day of the incident and reported to the OSHA Buffalo Area office on 07/09/18. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (O) $0
- — C (O) $6467
- — Z (O) $6467
1910.303 F04
- Issued
- Sep 7, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(f)(4): Disconnecting means were not capable of accepting a lock in the open position. a) On or about 07/10/18 at the Castile location; employees were exposed to amputation hazard when the disconnect handle for the #11 shaper machine was missing and could not be used to accept a lock in the open position. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Upstate Door, INC.
View Upstate Door, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321911)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343283115.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.