Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: QUICKDRAIN USA

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of QUICKDRAIN USA in 2597 W. 64TH AVE., DENVER, CO 80221 (NAICS 332913). OSHA activity number 343283461.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Quickdrain USA — free Get an email when a new federal OSHA severe-injury report for Quickdrain USA is published. One employer, no account, unsubscribe in one click.
Establishment
QUICKDRAIN USA
Site address
2597 W. 64TH AVE.
City
DENVER
State
CO
ZIP
80221
Mailing
2597 W. 64TH AVE., DENVER, CO 80221
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332913
Employees
850
Ownership type
A

3 citations on file for this inspection.

1904.39 A02

Serious Gravity 1 1 instance 2 exposed
Issued
Nov 9, 2018
Abate by
Dec 6, 2018
Penalty
Initial $4,712 · Current $4,712
29 CFR 1904.39(a)(2): Basic Requirement. Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.  (a) Quickdrain USA at 2597 W. 64th Ave., Denver, CO 80221: On or before 6/14/2018, the employer did not report an amputation that occurred at work within 24 hours.  The employer reported this incident to OSHA after five calendar days.
Recent events (1)
  • — Z (S) $4712

1910.212 A03 II

Serious Gravity 5 3 instances 3 exposed
Issued
Nov 9, 2018
Abate by
Dec 17, 2018
Penalty
Initial $7,853 · Current $7,853
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):    (a)   Quickdrain USA at 2597 W. 64th Ave, Denver, CO 80221:  On and before June 14, 2016 the employer did not ensure the points of operation were properly guarded to prevent employees from having any part of their body in the danger zone during operation. This condition exposed the employees to amputation hazards. This condition includes, but is not limited to, the following equipment:                (1)   Router table  Inadequately guarded point of operation presented amputation hazards. The opening under the blade guard measured 1-1/8 inches high.             (2)   Table saw  Unguarded point of operation presented amputation hazards.             (3)   Radial arm saw  Unguarded point of operation presented amputation hazards.
Recent events (1)
  • — Z (S) $7853

1910.134 C02 I

Other-than-serious 2 instances 2 exposed
Issued
Nov 9, 2018
Abate by
Dec 17, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.134(c)(2)(i): While the employer did provide respirators at the request of employees and permited employees to use their own respirators, the employer did not determine that such respirator use will not in itself create a hazard. If the employer did not determine that any voluntary respirator use is permissible, the employer did not provide the respirator users with the information contained in Appendix D to this section ("Information for Employees Using Respirators When Not Required Under the Standard");   (a) Quickdrain USA at 2597 W. 64th Ave., Denver, CO 80221:  On and before June 14, 2018, the employer did not ensure that the employees voluntarily using a half face, tight fitting respirator in the production area and while using the router table, table saw, and radial arm saw to cut foam core (ArmaFORM PET GR) were medically able to use that respirator and that the respirator was cleaned, stored and maintained so its use did not present a health hazard to the employee. The employer did not provide a copy of Appendix D to 29 CFR 1910.134 to employees voluntarily wearing respirators.
Recent events (1)
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343283461.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.