Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BEAVERHEAD MOTORS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BEAVERHEAD MOTORS, INC. in 675 N MONTANA STREET, DILLON, MT 59725 (NAICS 441110). OSHA activity number 343285391.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Beaverhead Motors, INC. — free Get an email when a new federal OSHA severe-injury report for Beaverhead Motors, INC. is published. One employer, no account, unsubscribe in one click.
Site address
675 N MONTANA STREET
City
DILLON
State
MT
ZIP
59725
Mailing
675 N MONTANA STREET, DILLON, MT 59725
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
441110
Employees
47
Ownership type
A

6 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 2 instances 1 exposed
Issued
Nov 2, 2018
Abate by
Nov 30, 2018
Penalty
Initial $6,467 · Current $3,234 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a struck-by hazard:     a) Beaverhead Motors, Inc., 675 N Montana Street, Dillon, MT: Challenger Automotive Lift, Model E12, Serial # 101000000061561, label number 6: On or about July 9, 2018 and at times prior, employees were exposed to struck by hazards while elevating vehicles using an automotive lift with faulty arm restraints.     b) Beaverhead Motors, Inc., 675 N Montana Street, Dillon, MT: Rotary Automotive Lift. On or about July 9, 2018 and at times prior, employees were exposed to struck by hazards while elevating vehicles using an automotive alignment lift rack with a fractured under carriages deck.
Recent events (2)
  • — I (S) $3233.5
  • — Z (S) $6467

1910.29 B02 I

Serious Gravity 1 1 instance 1 exposed
Issued
Nov 2, 2018
Abate by
Nov 30, 2018
Penalty
Initial $3,879 · Current $1,940 Reduced
29 CFR 1910.29(b)(2)(i): Midrails were not installed at a height midway between the top edge of the guiderail system and the walking-working surface:    a) Storage room above the service office located at 675 N Montana Street, Dillon, MT: On or about July 9, 2017 and times prior, employees were exposed to fall hazards while using unguarded stairwell to access the storage room located above the service manager's office.
Recent events (2)
  • — I (S) $1939.5
  • — Z (S) $3879

1910.134 C01

Serious Gravity 1 7 instances 1 exposed
Issued
Nov 2, 2018
Abate by
Nov 30, 2018
Penalty
Initial $3,879 · Current $1,940 Reduced
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:     a) Body Shop, located at 675 N Montana Street, Dillon, MT: On or about July 9, 2018 and at times prior, employees were exposed to respiratory hazards from chemicals such as, but not limited to toluene, methanol, acetone, and ligroin while using these chemicals in various phases of auto body repairs. The employer required respirators but did not have a procedure for selecting the appropriate respirator in that the 3M filtering face piece respirators (model 7503) as required in 1910.134(c)(1)(i).     b) Body Shop, located at 675 N Montana Street, Dillon, MT: On or about July 9, 2018 and at times prior, employees were exposed to respiratory hazards from chemicals such as, but not limited to toluene, methanol, acetone, and ligroin while using these chemicals in various phases of auto body repairs. The employer did not provide medical evaluations to employees required to use the respirators as required in 1910.134(c)(1)(ii).     c) Body Shop, located at 675 N Montana Street, Dillon, MT: On or about July 9, 2018 and at times prior, employees were exposed to respiratory hazards from chemicals such as, but not limited to toluene, methanol, acetone, and ligroin while using these chemicals in various phases of auto body repairs. The employer did not provide fit testing procedures for tight-fitting respirators to employees required to use the respirators as required in 1910.134(c)(1)(iii).     d) Body Shop, located at 675 N Montana Street, Dillon, MT: On or about July 9, 2018 and at times prior, employees were exposed to respiratory hazards from chemicals such as, but not limited to toluene, methanol, acetone, and ligroin while using these chemicals in various phases of auto body repairs. The employer did not provide procedures for cleaning, disinfecting, storing, inspecting, repairing, discarding, and otherwise maintaining respirators of employees required to use the respirators as required in 1910.134(c)(1)(v).     e) Body Shop, located at 675 N Montana Street, Dillon, MT: On or about July 9, 2018 and at times prior, employees were exposed to respiratory hazards from chemicals such as, but not limited to toluene, methanol, acetone, and ligroin while using these chemicals in various phases of auto body repairs. The employer did not provide training of employees in the respiratory hazards to which they are potentially exposed during routine and emergency situations for employees required to use the respirators as required in 1910.134(c)(1)(vii).     f) Body Shop, located at 675 N Montana Street, Dillon, MT: On or about July 9, 2018 and at times prior, employees were exposed to respiratory hazards from chemicals such as, but not limited to toluene, methanol, acetone, and ligroin while using these chemicals in various phases of auto body repairs. The employer did not provide training on putting on, removing, or the limitations of the respirators for employees required to use the respirators as required in 1910.134(c)(1)(viii).     g) Body Shop, located at 675 N Montana Street, Dillon, MT: On or about July 9, 2018 and at times prior, employees were exposed to respiratory hazards from chemicals such as, but not limited to toluene, methanol, acetone, and ligroin while using these chemicals in various phases of auto body repairs. The employer did not establish work-site specific procedures to regularly evaluate the effectiveness of the program as required in 1910.134(c)(1)(ix).
Recent events (2)
  • — I (S) $1939.5
  • — Z (S) $3879

1910.212 A01

Serious Gravity 1 1 instance 1 exposed
Issued
Nov 2, 2018
Abate by
Nov 30, 2018
Penalty
Initial $3,880 · Current $1,940 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    (a) Body shop, located at 675 N Montana Street, Dillon, MT: On or about July 9, 2018 and at times prior, employees were exposed to caught in hazards while utilizing an unguarded Central Machinery 16 speed floor drill press; serial 35585-1430.
Recent events (2)
  • — I (S) $1939.5
  • — Z (S) $3880

1904.7 B01 IV

Other-than-serious 1 instance 47 exposed
Issued
Nov 2, 2018
Abate by
Nov 30, 2018
Penalty
Initial $0 · Current $0
29 CFR 1904.7(b)(1)(iv): 29 CFR 1904.7(b)(5): An injury or illness involving medical treatment, was not properly classified on the OSHA 300 Log by placing a check mark in the space for other recordable cases:  a) Office located at 675 N Montana Street, Dillon, MT: On or about July 9, 2018 and at times prior, employer failed to maintain the required OSHA Injury and Illness records.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 E01

Other-than-serious 1 instance 1 exposed
Issued
Nov 2, 2018
Abate by
Nov 30, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a) Service Area, located at 675 N Montana Street, Dillon, MT: On or about July 9, 2018 and at times prior, employees were exposed to toluene, methanol, acetone, and ligroin during the automotive repair process. The employer failed to provide effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343285391.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.