CORPUS CHRISTI, TX —
OSHA Inspection: FERNANDO'S WOODWORK L.L.C.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of FERNANDO'S WOODWORK L.L.C. in 2705 LIPAN STREET, CORPUS CHRISTI, TX 78408 (NAICS 337212). OSHA activity number 343286761.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FERNANDO'S WOODWORK L.L.C.
- Site address
- 2705 LIPAN STREET
- City
- CORPUS CHRISTI
- State
- TX
- ZIP
- 78408
- Mailing
- 2705 LIPAN STREET, CORPUS CHRISTI, TX 78408
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337212
- Employees
- 20
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 F02
- Issued
- Sep 24, 2018
- Abate by
- Oct 19, 2018
- Penalty
- Initial $2,439 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using a tight-fitting facepiece respirator were not annually fit tested: On or about July 12, 2018, an employee wore a half-face respirator and had not received annual fit-testing. Juan Fernando Mayen was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.134(f)(2), which was contained in OSHA inspection number 1157395, citation number 1, item number 2-c and was affirmed as a final order on August 12, 2016, with respect to a workplace located at 3735 Wow Rd., Corpus Christi, TX 78413.
Recent events (2)
- — I (R) $1000
- — Z (R) $2439
1910.213 C01
- Issued
- Sep 24, 2018
- Abate by
- Oct 19, 2018
- Penalty
- Initial $8,130 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: On or about July 10, 2018, in the hard wood department, an employee used a table saw that was not guarded. Juan Fernando Mayen was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.213(c)(1), which was contained in OSHA inspection number 1157395, citation number 1, item number 3-b and was affirmed as a final order on August 12, 2016, with respect to a workplace located at 3735 Wow Rd., Corpus Christi, TX 78413.
Recent events (2)
- — I (R) $5000
- — Z (R) $8130
1910.213 C03
- Issued
- Sep 24, 2018
- Abate by
- Oct 19, 2018
- Penalty
- Initial $8,130 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: On or about July 10, 2018, in the hard wood department, an employee used a table saw that did not have non kickback fingers or dogs. Juan Fernando Mayen was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.213(c)(3), which was contained in OSHA inspection number 1157395, citation number 1, item number 3-d and was affirmed as a final order on August 12, 2016, with respect to a workplace located at 3735 Wow Rd., Corpus Christi, TX 78413.
Recent events (2)
- — I (R) $5000
- — Z (R) $8130
1910.134 K
- Issued
- Sep 24, 2018
- Abate by
- Oct 19, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k): The employer did not provide comprehensive, understandable training which did not occur annually and/or more often if necessary: On or about July 12, 2018, an employee wore a half-face respirator and had not received annual training on respirators.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 G08
- Issued
- Sep 24, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical: On or about July 10, 2018, the employer did not have a safety data sheet for each hazardous chemical used by employees to manufacture wooden cabinets and doors.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H01
- Issued
- Sep 24, 2018
- Abate by
- Oct 19, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: On or about July 12, 2018, at this establishment in the laminate department, an employee used hazardous chemicals, such as but not limited to, adhesives to manufacture wooden cabinets. The employer did not train the employee on hazardous chemicals.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 337212)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343286761.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.