Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: KONKUS CORPORATION

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of KONKUS CORPORATION in ROUTE 206 BRIDGE OVER DRAKES BROOK, FLANDERS, NJ 07836 (NAICS 237310). OSHA activity number 343291563.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Konkus Corporation — free Get an email when a new federal OSHA severe-injury report for Konkus Corporation is published. One employer, no account, unsubscribe in one click.
Establishment
KONKUS CORPORATION
Site address
ROUTE 206 BRIDGE OVER DRAKES BROOK
City
FLANDERS
State
NJ
ZIP
07836
Mailing
3322 ROUTE 22 WEST BLDG. 10, STE. 1005-1006, BRANCHBURG, NJ 08876
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
237310
Employees
13
Ownership type
A

4 citations on file for this inspection.

1926.1153 C01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 2, 2018
Abate by
Aug 22, 2018
Penalty
Initial $3,696 · Current $3,000 Reduced
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section:    a) Worksite at bridge over Drake's Brook, Route 206, Flanders, NJ    Laborers cut concrete with a handheld power saw without an integrated water delivery system that continuously fed water to the blade.    Violation occurred on or about 7/10/18.
Recent events (3)
  • — F (S) $3000
  • — C (S) $3696
  • — Z (S) $3696

1926.1153 D02 I

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 2, 2018
Abate by
Sep 20, 2018
Penalty
Initial $0 · Current $0
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:  a) Worksite at bridge over Drake's Brook, Route 206, Flanders, NJ  The employer did not assess the exposure of laborers who cut concrete with a handheld power saw without an integrated water delivery system that continuously fed water to the blade.  Violation occurred on or about 7/10/18.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.1153 G01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 2, 2018
Abate by
Sep 20, 2018
Penalty
Initial $3,696 · Current $2,000 Reduced
29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan:    a) Worksite at bridge over Drake's Brook, Route 206, Flanders, NJ    The employer did not establish and implement a written exposure control plan for workers with exposure to respirable crystalline silica during cutting of concrete with a handheld power saw.    Violation occurred on or about 7/10/18.
Recent events (3)
  • — F (S) $2000
  • — C (S) $3696
  • — Z (S) $3696

1926.1153 I01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 2, 2018
Abate by
Sep 20, 2018
Penalty
Initial $3,696 · Current $2,000 Reduced
29 CFR 1926.1153(i)(1): The employer did not ensure that each employee was trained in accordance with the provisions of HCS and paragraph (i)(2) of this section:    a) Worksite at bridge over Drake's Brook, Route 206, Flanders, NJ    The employer did not ensure employees who cut concrete with a handheld power saw had been trained on respirable crystalline silica including the health hazards, tasks creating exposure, control methods, 29 CFR 1926.1153, competent person and medical surveillance.    Violation occurred on or about 7/10/18.
Recent events (3)
  • — F (S) $2000
  • — C (S) $3696
  • — Z (S) $3696

View Konkus Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343291563.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.