Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MILLWOOD, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of MILLWOOD, INC. in 5530 SR 6 WEST SUITE 1, TUNKHANNOCK, PA 18657 (NAICS 321920). OSHA activity number 343293387.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Millwood, INC. — free Get an email when a new federal OSHA severe-injury report for Millwood, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
MILLWOOD, INC.
Site address
5530 SR 6 WEST SUITE 1
City
TUNKHANNOCK
State
PA
ZIP
18657
Mailing
5530 SR 6 WEST SUITE 1, TUNKHANNOCK, PA 18657
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321920
Employees
120
Ownership type
A

2 citations on file for this inspection.

1910.219 F03

Deleted Serious Gravity 5 1 instance 8 exposed
Issued
Nov 5, 2018
Abate by
Nov 19, 2018
Penalty
Initial $10,163 · Current $0 Reduced
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed:  a) 45 Degree Turn, Line 1, 5530 S.R. 6 West, Suite 1, Tunkhannock, PA - The conveyor rollers leading into the 45 Degree Turn were driven by a chain and sprocket system three (3) foot above the concrete floor that was not enclosed on the inner side of the curve exposing employees to an in-running nip point and caught-in hazards, as observed on or about July 12, 2018.  b) 45 Degree Turn, Line 2, 5530 S.R. 6 West, Suite 1, Tunkhannock, PA - The conveyor rollers leading into the 45 Degree Turn were driven by a chain and sprocket system three (3) foot above the concrete floor that was not enclosed on the outer and inner side of the curve exposing employees to in-running nip points and caught-in hazards, as observed on or about July 12, 2018.  c) Paint Booths 1 and 2 on Lines 1 and 2, 5530 S.R. 6 West, Suite 1, Tunkhannock, PA - The paint booth conveyor rollers exiting the four (4) paint booths were each driven by chain and sprocket systems three (3) foot above the concrete floor that were not enclosed exposing employees to in-running nip points and caught-in hazards, as observed on or about July 12, 2018.  In accordance with 29 CFR 1903.19, abatement certification is required for this violation.
Recent events (3)
  • — F (S) $0
  • — C (S) $10163
  • — Z (S) $10163

1904.39 A02

Other-than-serious 1 instance 1 exposed
Issued
Nov 5, 2018
Penalty
Initial $10,163 · Current $10,163
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours.   a) Line 1, 5530 S.R. 6 West, Suite 1, Tunkhannock, PA - An employee sustained a work-related injury on June 7, 2018 after coming into contact with the ingoing nip point of a chain and sprocket on the operators side of the pallet exit of the first paint booth that resulted in an amputation of the tip of the left ring finger. The amputation was not reported by the employer to OSHA within twenty-four (24) hours, on or about June 8, 2018.  In accordance with 29 CFR 1903.19, abatement certification is not required for this violation as the hazardous condition was corrected during the inspection.
Recent events (3)
  • — F (O) $10163
  • — C (O) $10163
  • — Z (O) $10163

View Millwood, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343293387.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.