GALVESTON, TX —
OSHA Inspection: RG PRODUCTION FRAMING, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RG PRODUCTION FRAMING, LLC in 2508 MARKET STREET, GALVESTON, TX 77550 (NAICS 238130). OSHA activity number 343317293.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RG PRODUCTION FRAMING, LLC
- Site address
- 2508 MARKET STREET
- City
- GALVESTON
- State
- TX
- ZIP
- 77550
- Mailing
- 25118 LYNBRIAR LANE, SPRING, TX 77373
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 10
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.102 B01
- Issued
- Aug 28, 2018
- Abate by
- Oct 16, 2018
- Penalty
- Initial $3,696 · Current $1,844 Reduced
General-duty citation text
29 CFR 1926.102(b)(1): Protective eye and face protection devices did not comply with any of the ANSI/ISEA consensus standards identified in sections (i)-(iii) of this standard: a) At the site, On or about July 19, 2018 employees were permitted to operate pneumatic nail guns and circular saws without ANSI approved eye protection.
Recent events (2)
- — I (S) $1844
- — Z (S) $3696
1926.501 B13
- Issued
- Aug 28, 2018
- Abate by
- Oct 16, 2018
- Penalty
- Initial $5,173 · Current $2,582 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system: a) At the site: On or about July 19, 2018 employees engaged in residential construction activities at a height of approximately 31 feet above a lower level were not protected by guardrail systems, safety net system, or personal fall arrest system.
Recent events (2)
- — I (S) $2582
- — Z (S) $5173
1926.503 A01
- Issued
- Aug 28, 2018
- Abate by
- Oct 16, 2018
- Penalty
- Initial $5,173 · Current $2,582 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a) At the site, on or about July 19, 2018: The employer did not provide a training program for employees performing framing and decking work approximately 31 feet above a lower level.
Recent events (2)
- — I (S) $2582
- — Z (S) $5173
1926.1052 C01 II
- Issued
- Aug 28, 2018
- Abate by
- Oct 16, 2018
- Penalty
- Initial $2,956 · Current $1,474 Reduced
General-duty citation text
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with a stairrail system along each unprotected side or edge: a) At the site, rear of structure: On or about July 19, 2018, a fixed stairway used by employees had 15 risers and was not equipped with a stairrail system along each unprotected side.
Recent events (2)
- — I (S) $1474
- — Z (S) $2956
1926.1053 B01
- Issued
- Aug 28, 2018
- Abate by
- Oct 16, 2018
- Penalty
- Initial $2,956 · Current $1,478 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access: a) At the site, rear access: On or about July 19, 2018 an aluminum extension ladder used for access from the ground to the elevated first story did not have side rails extended at least three feet above the upper landing.
Recent events (2)
- — I (S) $1478
- — Z (S) $2956
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343317293.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.