JAMESTOWN, NY —
OSHA Inspection: EMINENCE GROUP INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of EMINENCE GROUP INC. in 1021 ALLEN ST., JAMESTOWN, NY 14701 (NAICS 337211). OSHA activity number 343317814.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EMINENCE GROUP INC.
- Site address
- 1021 ALLEN ST.
- City
- JAMESTOWN
- State
- NY
- ZIP
- 14701
- Mailing
- 1021 ALLEN ST., JAMESTOWN, NY 14701
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337211
- Employees
- 30
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Sep 26, 2018
- Abate by
- Nov 9, 2018
- Penalty
- Initial $6,467 · Current $3,167 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about 7/20/2018, in the production area, when employees perform maintenance and servicing activities, such as replacing the blade on the table saw, energy control procedures were not being utilized, exposing employees to unexpected start of the table saw. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $3167
- — C (S) $6467
- — Z (S) $6467
1910.147 C06 I
- Issued
- Sep 26, 2018
- Abate by
- Nov 9, 2018
- Penalty
- Initial $6,467 · Current $3,166 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) On or about 07/20/2018, Throughout the facility, employer did not conduct periodic inspections of the Lockout/Tagout procedures for machines such as, but not limited to table saw( SCMI model SI 16 W). ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $3166
- — C (S) $6467
- — Z (S) $6467
1910.147 C07 I A
- Issued
- Sep 26, 2018
- Abate by
- Nov 9, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation. a) On or about 07/20/2018, throughout facility, employer did not provide training to authorized employees who are required to Lockout machines such as, but not limited to, the table saw to replace the blade. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Sep 26, 2018
- Abate by
- Nov 9, 2018
- Penalty
- Initial $6,467 · Current $3,167 Reduced
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) On or about 07/20/2018, in the production area, employees were exposed to struck by hazards when ripping wood boards on the table saw without having non kickbacks fingers or dogs installed as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $3167
- — C (S) $6467
- — Z (S) $6467
1904.39 A02
- Issued
- Sep 26, 2018
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four hours: a) On or about 07/20/2018 at Eminence Group Inc. dba Colecraft commercial Furnishings, 1021 Allen St, Jamestown NY ; where a work related incident resulting in a amputation occurred, the employer did not report the incident to OSHA within 24 hours. Incident occurred on 05/15/2018. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (O) $0
- — C (O) $5000
- — Z (O) $5000
More inspections in this industry (NAICS 337211)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343317814.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.