Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RYCON CONSTRUCTION INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of RYCON CONSTRUCTION INC. in 820 EAST OHIO STREET, PITTSBURGH, PA 15212 (NAICS 236220). OSHA activity number 343333134.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rycon Construction INC. — free Get an email when a new federal OSHA severe-injury report for Rycon Construction INC. is published. One employer, no account, unsubscribe in one click.
Site address
820 EAST OHIO STREET
City
PITTSBURGH
State
PA
ZIP
15212
Mailing
2501 SMALLMAN STREET, SUITE 100, PITTSBURGH, PA 15222
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
161
Ownership type
A

2 citations on file for this inspection.

1926.451 G04 II

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 6, 2018
Penalty
Initial $6,652 · Current $3,400 Reduced
29 CFR 1926.451(g)(4)(ii): The top edge height of toprails or equivalent member on supported scaffolds manufactured or placed in service after January 1, 2000 shall be installed between 38 inches (0.97 m) and 45 inches (1.2 m) above the platform surface. The top edge height on supported scaffolds manufactured and placed in service before January 1, 2000, and on all suspended scaffolds where both a guardrail and a personal fall arrest system are required shall be between 36 inches (0.9 m) and 45 inches (1.2 m). When conditions warrant, the height of the top edge may exceed the 45-inch height, provided the guardrail system meets all other criteria of paragraph (g)(4).    a) Job site, 820 East Ohio Street, Pittsburgh, PA: On or about July 26, 2018, during construction activities, the employer did not ensure that appropriate fall protection systems/devices were in use on a job built scaffold where fall hazards of to up approximately 12 feet existed.
Recent events (2)
  • — I (S) $3400
  • — Z (S) $6652

1926.454 C

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Aug 6, 2018
Penalty
Initial $0 · Current $0
29 CFR 1926.454(c): When the employer had reason to believe that an employee lacked the skill or understanding needed for safe work involving the erection, use or dismantling of scaffolds, the employer did not retrain each such employee so that the requisite proficiency is regained:    a) Job site, 820 East Ohio Street, Pittsburgh, PA: On or about July 26, 2018, during construction activities, the employer did not ensure that employees were appropriately trained in scaffold safety. Deficiencies noted included, but were not limited to, general lack of basic fall protection scaffold safety requirements, anchoring fall protection systems to a single 5/8" section of rebar while erecting scaffolding and failing to use appropriate fall protection systems/devices where exposed to fall hazards of up to approximately 12 feet during work activities on the scaffold.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Rycon Construction INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343333134.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.