MARLTON, NJ ·
OSHA Inspection: TECHNICAL HELP IN ENGINEERING AND MARKETING
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of TECHNICAL HELP IN ENGINEERING AND MARKETING in 56 STOW ROAD, MARLTON, NJ 08053 (NAICS 311999). OSHA activity number 343339669.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TECHNICAL HELP IN ENGINEERING AND MARKETING
- Site address
- 56 STOW ROAD
- City
- MARLTON
- State
- NJ
- ZIP
- 08053
- Mailing
- 56 STOW ROAD, MARLTON, NJ 08053
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311999
- Employees
- 75
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.147 C04 I
- Issued
- Nov 6, 2018
- Abate by
- Apr 1, 2019
- Penalty
- Initial $9,054 · Current $5,885 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Warehouse/Packaging Area: Procedures were not developed, documented and utilized for employees that provided maintenance to machines, such as, but not limited to Sanko FC1000, on or about 7/16/18. b) Warehouse/Cartoner Area: Procedures were not developed, documented and utilized for employees that cleared jams on machines such as, but not limited to Yeaman Horizontal Cartoner, on or about 7/19/18. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (5)
- · P (S) $5885
- · P (S) $5885
- · P (S) $5885
1910.147 C05 I
- Issued
- Nov 6, 2018
- Abate by
- Apr 1, 2019
- Penalty
- Initial $9,054 · Current $5,885 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing, or blocking of machines or equipment from energy sources: a) Warehouse/Packaging Area: The employer did not provide authorized employees lockout or tagout devices to use when performing maintenance on machines, such as, but not limited to Sanko FC1000, on or about 7/16/18. b) Warehouse/Cartoner Area: The employer did not provide authorized employees lockout or tagout devices to use when clearing jams on machines such as, but not limited to Yeaman Horizontal Cartoner, on or about 7/19/18. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (5)
- · P (S) $5885
- · P (S) $5885
- · P (S) $5885
1910.147 C07 I
- Issued
- Nov 6, 2018
- Abate by
- Apr 1, 2019
- Penalty
- Initial $9,054 · Current $5,885 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program was understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls were acquired by employees: a) Warehouse/Packaging Area: The employer did not provide lockout tagout training to employees that provided maintenance to machines, such as, but not limited to Sanko FC1000, on or about 7/16/18. b) Warehouse/Cartoner Area: The employer did not provide lockout tagout training to employees that cleared jams and maintenance on machines such as, but not limited to Yeaman Horizontal Cartoner, on or about 7/19/18. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (5)
- · P (S) $5885
- · P (S) $5885
- · P (S) $5885
More inspections in this industry (NAICS 311999)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343339669.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.