MIAMISBURG, OH —
OSHA Inspection: C. B. MANUFACTURING AND SALES COMPANY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of C. B. MANUFACTURING AND SALES COMPANY, INC. in 4475 INFIRMARY ROAD, MIAMISBURG, OH 45342 (NAICS 332216). OSHA activity number 343342473.
Where did this inspection happen?
- Establishment
- C. B. MANUFACTURING AND SALES COMPANY, INC.
- Site address
- 4475 INFIRMARY ROAD
- City
- MIAMISBURG
- State
- OH
- ZIP
- 45342
- Mailing
- 4475 INFIRMARY ROAD, MIAMISBURG, OH 45342
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332216
- Employees
- 60
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.213 C01
- Issued
- Abate by
- Penalty
- Initial $9959.00 · Current $9959.00
General-duty citation text
29 CFR 1910.213(c)(1): Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be positive, reliable, and in true alignment with the saw; and the mounting shall be adequate in strength to resist any reasonable side thrust or other force tending to throw it out of line: (a) On or about July 16, 2018 an employee operating the Delta Table Saw was exposed to the turning blade, in that the saw blade was not completely enclosed.
Recent events (2)
- — I (S) $9959
- — Z (S) $9959
1910.213 C03
- Issued
- Abate by
- Penalty
- Initial $9959.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.213(c)(3): Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut. (a) The Delta Table Saw did not have nonkickback fingers, thereby exposing employees to the wood being lifted or thrown back at the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $9959
More inspections in this industry (NAICS 332216)
LAPEER, MI—2026-05-13
ALDEN MANUFACTURING
MINNEAPOLIS, MN—2026-04-16
111071 - WARNER MANUFACTURING COMPANY
NEW BRITAIN, CT—2026-04-14
STANLEY BLACK - DECKER, INC.
ELK GROVE VILLAGE, IL—2026-03-13
KLEIN TOOLS, INC.
ALLENTOWN, PA—2026-03-12
FRAMEWORK TECHNOLOGIES, INC.
More inspections in OH
WELLINGTON, OH—2026-07-16
WHIRLAWAY CORPORATION
WAUSEON, OH—2026-07-16
WATSON WELL DRILLING INC.
SEVEN HILLS, OH—2026-07-15
STONEY ACRES BUILDERS LLC
SEVEN HILLS, OH—2026-07-15
GRB ENTERPRISES LLC
CHILLICOTHE, OH—2026-07-15
KENWORTH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343342473.