Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: TX LONGHORN CONSTRUCTION CORP

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of TX LONGHORN CONSTRUCTION CORP in 4458 TOWN CENTER PARKWAY, JACKSONVILLE, FL 32214 (NAICS 238140). OSHA activity number 343378725.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch TX Longhorn Construction Corp — free Get an email when a new federal OSHA severe-injury report for TX Longhorn Construction Corp is published. One employer, no account, unsubscribe in one click.
Site address
4458 TOWN CENTER PARKWAY
City
JACKSONVILLE
State
FL
ZIP
32214
Mailing
140 GLENDALE STREET APT 407, LAKELAND, FL 33803
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
2
Ownership type
A

9 citations on file for this inspection.

1903.19 C01

Other-than-serious 6 instances 2 exposed
Issued
Apr 3, 2019
Abate by
May 20, 2019
Penalty
Initial $319 · Current $319
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  a. On or about 03/12/2019, the employer failed to submit documentation and certification of corrective action for citation 1 item 1 with an abatement due date of 12/13/2018.   b. On or about 03/12/2019, the employer failed to submit documentation and certification of corrective action for citation 1 item 3 with an abatement due date of 12/13/2018.   c. On or about 03/12/2019, the employer failed to submit documentation and certification of corrective action for citation 1 item 4a with an abatement due date of 12/13/2018.   d. On or about 03/12/2019, the employer failed to submit documentation and certification of corrective action for citation 1 item 4b with an abatement due date of 12/13/2018.   e. On or about 03/12/2019, the employer failed to submit documentation and certification of corrective action for citation 1 item 4c with an abatement due date of 12/13/2018.   f. On or about 03/12/2019, the employer failed to submit documentation and certification of corrective action for citation 2 item 1 with an abatement due date of 12/13/2018.
Recent events (1)
  • — Z (O) $319

1910.178 L01 I

Serious Gravity 10 1 instance 1 exposed
Issued
Oct 25, 2018
Abate by
Dec 13, 2018
Penalty
Initial $3,880 · Current $3,880
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  a. On or about August 9, 2018, the crew leader that operated the rough terrain extendable boom powered industrial truck onsite in an unsafe manner had not been trained and evaluated by the employer.
Recent events (1)
  • — Z (S) $3880

1926.451 C02 V

Serious Gravity 10 1 instance 1 exposed
Issued
Oct 25, 2018
Penalty
Initial $3,880 · Current $3,880
29 CFR 1926.451(c)(2)(v): Fork-lifts were used to support scaffold platforms while the entire platform was not attached to the fork and the fork-lift was moved horizontally while the platform was occupied:  a. On or about August 9, 2018, the crew leader operated the rough terrain extendable boom powered industrial truck onsite with an 10-foot long x 4-foot wide wooden covered pallet scaffold platform without guardrails that was on the forks but not securely attached to the forks or forklift, an employee without any fall protection was on and worked from the platform when operator moved the platform horizontally and vertically, exposed to 10-foot fall and struck-by hazards.
Recent events (1)
  • — Z (S) $3880

1926.451 G01 VII

Serious Gravity 10 1 instance 1 exposed
Issued
Oct 25, 2018
Penalty
Initial $0 · Current $0
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section:  a. On or about August 9, 2018, an employee waterproofing material on the north side exterior of building from an 10-foot long x 4-foot wide wooden covered pallet scaffold platform without guardrails that was on the forks but not securely attached to the forks of the rough terrain powered industrial truck without any fall protection systems, being exposed to 10-foot fall hazard.
Recent events (1)
  • — Z (S) $0

1926.503 A02

Serious Gravity 10 1 instance 1 exposed
Issued
Oct 25, 2018
Abate by
Dec 13, 2018
Penalty
Initial $3,880 · Current $3,880
29 CFR 1926.503(a)(2): The employer did not assure that each employee exposed to fall hazards was trained by a competent person qualified in the areas specified in 29 CFR 1926.503 (a)(2)(i) through (viii):  a. On or about August 9, 2018, the employee applying waterproofing material on the north side exterior of building from an 10-foot long x 4-foot wide wooden covered pallet scaffold platform without guardrails that was on the forks but not securely attached to the forks of the rough terrain powered industrial truck without use of any fall protection systems, being exposed to 10-foot fall hazard had not been trained on fall protection by the employer.
Recent events (1)
  • — Z (S) $3880

1910.1200 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 25, 2018
Abate by
Dec 13, 2018
Penalty
Initial $2,217 · Current $2,217
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (Construction Reference: 1926.59):  a. On or about August 9, 2018, the employer had not developed, implemented, maintained and/or communicated a written hazard communication program for their employees that worked with hazardous materials to include Sto Gold Coat and Sto Gold Fill waterproofing materials.
Recent events (1)
  • — Z (S) $2217

1910.1200 G01

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 25, 2018
Abate by
Dec 13, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use:  a. On or about August 9, 2018, the employer did not provide and have available the safety data sheets for the hazardous materials to include Sto Gold Coat and Sto Gold Fill waterproofing materials.
Recent events (1)
  • — Z (S) $0

1910.1200 H01

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 25, 2018
Abate by
Dec 13, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (Construction Reference: 1926.59):  a. On or about August 9, 2018, the employer had not provided hazard communication training to employees that worked with hazardous materials such as, but not limited to Sto Gold Coat and Sto Gold Fill waterproofing products.
Recent events (1)
  • — Z (S) $0

1910.178 L06

Other-than-serious 1 instance 1 exposed
Issued
Oct 25, 2018
Abate by
Dec 13, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  a. On or about August 9, 2018, the employer had not certified that the crew leader powered industrial truck operator had been trained and evaluated.
Recent events (1)
  • — Z (O) $0

View TX Longhorn Construction Corp's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343378725.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.