Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ALLEN HARIM FOODS, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of ALLEN HARIM FOODS, LLC in 18752 HARBESON ROAD, HARBESON, DE 19951 (NAICS 311615). OSHA activity number 343393708.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Allen Harim Foods, LLC — free Get an email when a new federal OSHA severe-injury report for Allen Harim Foods, LLC is published. One employer, no account, unsubscribe in one click.
Site address
18752 HARBESON ROAD
City
HARBESON
State
DE
ZIP
19951
Mailing
18752 HARBESON ROAD, HARBESON, DE 19951
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311615
Employees
1650
Ownership type
A

5 citations on file for this inspection.

1910.147 C04 I

Other-than-serious 1 instance 3 exposed
Issued
Feb 6, 2019
Abate by
Feb 19, 2019
Penalty
Initial $10,419 · Current $10,419
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    a) Venter Area of 1875 Harbeson Road, Harbeson, Delaware - On or about 20 AUG 2018, the employer failed to develop lockout procedures for moving hangers to indicate the system they were locking out. As a result, the procedures were not clear, and therefore not utilized by employees.
Recent events (3)
  • — F (O) $10419
  • — C (S) $10419
  • — Z (S) $10419

1910.147 C06 I C

Other-than-serious 1 instance 3 exposed
Issued
Feb 6, 2019
Abate by
Feb 19, 2019
Penalty
Initial $10,419 · Current $10,419
29 CFR 1910.147(c)(6)(i)(C): Where lockout was used for energy control, the periodic inspection did not include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure being inspected:    a) Throughout the facility at 18752 Harbeson Road, Harbeson, DE - On or about 20 AUG 2018, the employer failed to ensure that the periodic inspections included a review between the employee inspecting and each authorized employee.
Recent events (3)
  • — F (O) $10419
  • — C (S) $10419
  • — Z (S) $10419

1910.147 C06 II

Other-than-serious 1 instance 3 exposed
Issued
Feb 6, 2019
Abate by
Feb 19, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(6)(ii): The periodic inspection certification of energy control procedures did not contain the required documentation on identification of the machine or equipment, and the employees included:    a) Venter Area of 1875 Harbeson Road, Harbeson, Delaware - On or about 20 AUG 2018, the employer failed to ensure that the periodic inspection certification of the venter area included the venter, or the chicken line, or other equipment evaluated.  Authorized employees involved with the inspection were also not identified on the certification.
Recent events (3)
  • — F (O) $0
  • — C (S) $0
  • — Z (S) $0

1910.147 D02

Serious Gravity 5 1 instance 3 exposed
Issued
Feb 6, 2019
Abate by
Feb 19, 2019
Penalty
Initial $10,419 · Current $8,856 Reduced
29 CFR 1910.147(d)(2): The machine or equipment was not turned off or shut down using the procedures established for the machine or equipment:    a)  Venter Area of 1875 Harbeson Road, Harbeson, Delaware -  On or about Aug 20, 2018, the employer failed to ensure employees turned off or shut down equipment, using the procedures established for the machine or equipment, prior to engaging in servicing or maintenance, of the chicken hanger line in the Venter Area.  Employees untangling hangers on the chicken line while in operation, were exposed to amputation hazards.
Recent events (3)
  • — F (S) $8856.15
  • — C (S) $10419
  • — Z (S) $10419

1910.219 E02 IV

Deleted Serious Gravity 10 1 instance 2 exposed
Issued
Feb 6, 2019
Abate by
Feb 12, 2019
Penalty
Initial $13,260 · Current $0 Reduced
29 CFR 1910.219(e)(2)(iv): Overhead chain and link belt drives, governed by the same rules as overhead horizontal belts, were not enclosed by guard(s) in the same manner as belts conforming to the requirements specified at 29 CFR 1910.219(m) and (o):   a) Venter Area of 1875 Harbeson Road, Harbeson, Delaware  - Observed on or about 20 AUG 2018, the employer failed to ensure that all chain and link belt driving hangers through a Poultry Venter Machine were protected when less than 7 feet from the ground, and the standing platforms where employees were performing poultry processing operations.
Recent events (3)
  • — F (S) $0
  • — C (S) $13260
  • — Z (S) $13260

View Allen Harim Foods, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343393708.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.