JAMAICA, NY —
OSHA Inspection: TARAN IRON WORKS
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of TARAN IRON WORKS in 83-26 CHARLECOTE RIDGE, JAMAICA, NY 11423 (NAICS 236115). OSHA activity number 343409736.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TARAN IRON WORKS
- Site address
- 83-26 CHARLECOTE RIDGE
- City
- JAMAICA
- State
- NY
- ZIP
- 11423
- Mailing
- 181-10 93RD AVENUE, JAMAICA, NY 11423
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236115
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.100 A
- Issued
- Feb 20, 2019
- Abate by
- Feb 26, 2019
- Penalty
- Initial $3,978 · Current $3,978
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns: (a) On or about August 21, 2019 at 83-26 Charlecote Ridge, Jamaica, NY 11423. Employees working below the working level were not wearing hard hats. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (1)
- — Z (S) $3978
1926.350 A09
- Issued
- Feb 20, 2019
- Abate by
- Feb 26, 2019
- Penalty
- Initial $2,842 · Current $2,842
General-duty citation text
29 CFR 1926.350(a)(9): Compressed gas cylinders shall be secured in an upright position at all times except, if necessary, for short periods of time while cylinders are actually being hoisted or carried: (a) On or about August 21, 2018 at 83-26 Charlecote Ridge, Jamaica, NY, 11423. Compressed gas cylinders were not secured in an upright position when being used to weld a steel angle. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2842
1926.451 B01 II
- Issued
- Feb 20, 2019
- Abate by
- Feb 28, 2019
- Penalty
- Initial $3,978 · Current $3,978
General-duty citation text
29 CFR 1926.451(b)(1)(ii): The platform was not planked or decked as fully as possible and the remaining open space between the platform and the uprights exceeded 9.5 inches (24.1 cm): (a) On or about August 21, 2018 at 83-26 Charlecote Ridge, Jamaica, NY 11423. Employees installing steel angle from a tubular welded frame scaffold that was not fully planked at work level. The working level was approximately 13 feet from the lower level. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (1)
- — Z (S) $3978
1926.451 E01
- Issued
- Feb 20, 2019
- Abate by
- Feb 26, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(e)(1): Where scaffold platforms were more than 2 feet above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers, stairway-type ladders, ramps, walkways, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface was not used for access: (a) On or about August 21, 2018 at 83-26 Charlecote Ridge, Jamaica, NY 11423. Employees installing steel angle from a tubular welded frame scaffold climbed the scaffold to access the working level approximately 13 feet from the lower level. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (1)
- — Z (S) $0
1926.451 G01
- Issued
- Feb 20, 2019
- Abate by
- Feb 28, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level: (a) On or about August 21, 2018 at 83-26 Charlecote Ridge, Jamaica, NY 11423. Employees installing steel angle from a tubular welded frame scaffold without the use of fall protection. The working level approximately 13 feet from the lower level. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (1)
- — Z (S) $0
More inspections at Taran Iron Works
View Taran Iron Works's full OSHA safety record →
More inspections in this industry (NAICS 236115)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343409736.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.