PALATINE, IL —
OSHA Inspection: TARGET CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of TARGET CORPORATION in 679 E DUNDEE RD,, PALATINE, IL 60074 (NAICS 452111). OSHA activity number 343411062.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TARGET CORPORATION
- Site address
- 679 E DUNDEE RD,
- City
- PALATINE
- State
- IL
- ZIP
- 60074
- Mailing
- 679 E DUNDEE RD,, PALATINE, IL 60074
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 452111
- Employees
- 150
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.305 G02 II
- Issued
- Sep 6, 2018
- Abate by
- Sep 25, 2018
- Penalty
- Initial $6,097 · Current $4,268 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap: (a) Shipping and Receiving - On August 23, 2018, the employer failed to ensure that all flexible cords including the flexible cord at Dock Door 1, used to power the light fixture, was used in a continuous length without a splice. In accordance with the requirements of 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete and must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase, or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — F (S) $4268
- — C (S) $6097
- — Z (S) $6097
1910.305 G01 IV A
- Issued
- Sep 6, 2018
- Abate by
- Sep 25, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: (a) Shipping and Receiving - On August 23, 2018, the employer failed to ensure that flexible cords were not used as a substitute for fixed wiring. A white extension cord was used to power a fan fixture at Dock 3. In accordance with the requirements of 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete and must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase, or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.305 G02 III
- Issued
- Sep 6, 2018
- Abate by
- Sep 25, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: (a) Shipping and Receiving - On August 23, 2018, the employer failed to ensure that the flexible cord connected to the fan fixture at Dock 3 was connected in a manner so that strain relief was provided. In accordance with the requirements of 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete and must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase, or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.178 L06
- Issued
- Sep 6, 2018
- Abate by
- Sep 18, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): (a) Shipping/Receiving - On August 23, 2018, the employer did not certify that each forklift truck operator had been evaluated as required by paragraph (l), with certification records that includes the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the evaluation prior to operating an motorized pallet jack. In accordance with the requirements of 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Target Corporation
View Target Corporation's full OSHA safety record →
More inspections in this industry (NAICS 452111)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343411062.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.