CALDER, ID —
OSHA Inspection: DANIELSON LOGGING, INC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of DANIELSON LOGGING, INC in LUNCH RIDGE EAST, CALDER, ID 83808 (NAICS 113310). OSHA activity number 343449922.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DANIELSON LOGGING, INC
- Site address
- LUNCH RIDGE EAST
- City
- CALDER
- State
- ID
- ZIP
- 83808
- Mailing
- 33069 HWY 6, SAINT MARIES, ID 83861
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 113310
- Employees
- 5
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.266 D01 VII A
- Issued
- Jan 16, 2019
- Abate by
- Feb 12, 2019
- Penalty
- Initial $3,297 · Current $0 Reduced
General-duty citation text
29 CFR 1910.266(d)(1)(vii)(A): The employer did not provide, at no cost to the employee, and ensure that each employee wear eye protection meeting the requirements of subpart I of Part 1910 where there was potential for eye injury due to falling or flying objects: On or about September 6, 2018 and at times prior thereto a the Yarder operator was disconnecting chokers at the landing where no eye protection was worn. NOTE-Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $3297
1910.266 F02 X C
- Issued
- Jan 16, 2019
- Abate by
- Feb 12, 2019
- Penalty
- Initial $3,297 · Current $1,700 Reduced
General-duty citation text
29 CFR 1910.266(f)(2)(x)(C): Each moving element not limited to blades, buckets, saws and shears, were not lowered to the ground or otherwise secured. On or about September 6, 2018 and at times prior thereto a CAT 324D Yarder was being used to yard logs to a sloped area, where the operator did not lower the bucket to the ground before leaving the operators station. NOTE-Abatement certification is required for this item.
Recent events (2)
- — I (S) $1700
- — Z (S) $3297
1910.266 H02 VI
- Issued
- Jan 16, 2019
- Abate by
- Feb 12, 2019
- Penalty
- Initial $9,054 · Current $4,700 Reduced
General-duty citation text
29 CFR 1910.266(h)(2)(vi): The backcut did not leave sufficient hinge wood to hold the tree to the stump during most of its fall so that the hinge is able to guide the tree's fall in the intended direction. On or About September 6, 2018 and at times prior thereto trees were felled manually with a chain saw where no hinge wood was left to guide the tree, or a Dutchman was used where the hinge wood was cut through. Abatement documentation and certification are required for this item.
Recent events (2)
- — I (S) $4700
- — Z (S) $9054
1910.266 H02 VII
- Issued
- Jan 16, 2019
- Abate by
- Feb 12, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.266(h)(2)(vii): The backcut was not above the level of the horizontal facecut in order to provide an adequate platform to prevent kickback. On or About September 6, 2018 and at times prior thereto trees were felled manually with a chain saw where the back cut was even with the horizontal face cut. Abatement documentation and certification are required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.266 F01 III
- Issued
- Jan 16, 2019
- Abate by
- Feb 12, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.266(f)(1)(iii): The employer did not assure that operating and maintenance instructions were available either on the machine or in the area where the machine was being operated: On or about September 6, 2018 and at times prior thereto a CAT 320C loader was being used to move logs to a cold decking area where no operating manual was available. NOTE-Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.266 F03 XII
- Issued
- Jan 16, 2019
- Abate by
- Feb 12, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.266(f)(3)(xii): The Employer did not ensure cracked window glass, which was a hazard to the operator, was replaced. On or about September 6, 2018 and at times prior thereto a CAT 324D yarder was being used to yard logs to the landing where the yarder window was cracked. NOTE-Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Danielson Logging, INC
View Danielson Logging, INC's full OSHA safety record →
More inspections in this industry (NAICS 113310)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343449922.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.