MARRERO, LA —
OSHA Inspection: GRETNA CABINET COMPANY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GRETNA CABINET COMPANY, INC. in 5127 TARAVELLA RD., MARRERO, LA 70072 (NAICS 337110). OSHA activity number 343454039.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GRETNA CABINET COMPANY, INC.
- Site address
- 5127 TARAVELLA RD.
- City
- MARRERO
- State
- LA
- ZIP
- 70072
- Mailing
- 5127 TARAVELLA RD., MARRERO, LA 70072
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 12
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.213 C01
- Issued
- Oct 11, 2018
- Abate by
- Oct 31, 2018
- Penalty
- Initial $5,174 · Current $4,139 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: On or about September 11, 2018, in the shop, where an employee suffered an amputation, the employer failed to ensure that circular hand-fed ripsaws were equipped with an appropriate hood or barrier guard prior to allowing employees to perform woodcutting tasks in the following instances: a) Lobo Tilting Arbor Saw, b) Delta Table Saw, c) Delta Rockwell 10" Unisaw, and d) Rockwell Unisaw.
Recent events (2)
- — I (S) $4139.2
- — Z (S) $5174
1910.213 C02
- Issued
- Oct 11, 2018
- Abate by
- Oct 31, 2018
- Penalty
- Initial $5,174 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: On or about September 11, 2018, in the shop, where an employee suffered an amputation, the employer failed to ensure that circular hand-fed ripsaws were equipped with an appropriate riving knife or spreader prior to allowing employees to perform woodcutting tasks in the following instances: a) Lobo Tilting Arbor Saw, b) Delta Table Saw, c) Delta Rockwell 10" Unisaw, and d) Rockwell Unisaw.
Recent events (2)
- — I (S) $0
- — Z (S) $5174
1910.213 C03
- Issued
- Oct 11, 2018
- Abate by
- Oct 31, 2018
- Penalty
- Initial $5,174 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: On or about September 11, 2018, in the shop, where an employee suffered an amputation, the employer failed to ensure that circular hand-fed ripsaws were equipped with appropriate dogs or anti-kickback pawls prior to allowing employees to perform woodcutting tasks in the following instances: a) Lobo Tilting Arbor Saw, b) Delta Table Saw, c) Delta Rockwell 10" Unisaw, and d) Rockwell Unisaw.
Recent events (2)
- — I (S) $0
- — Z (S) $5174
1904.4 A
- Issued
- Oct 11, 2018
- Abate by
- Oct 26, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.4(a): The employer did not record each work-related fatality, injury or illness case that resulted in the general recording criteria on the OSHA Form 300 or equivalent: On or about September 11, 2018, at Gretna Cabinet Company, Inc., where employees were injured, including the partial amputation of an employee's index finger, the employer did not record the injury as required by this Part.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1904.39 A02
- Issued
- Oct 11, 2018
- Abate by
- Oct 26, 2018
- Penalty
- Initial $2,000 · Current $1,600 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye: On or about September 11, 2018, at Gretna Cabinet Company, Inc., where an employee was injured in an amputation accident, the employer did not report the injury to OSHA within 24 hours. On August 31, 2018, an employee partially amputated his index finger while operating a table saw, but the employer did not report the injury to OSHA until September 7, 2018.
Recent events (2)
- — I (O) $1600
- — Z (O) $2000
More inspections in this industry (NAICS 337110)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343454039.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.