OSHA Inspection: EVERARDO ROJAS DBA EVERARDO ROJAS

Issued

Apr 30, 2019

Abate by

Jun 3, 2019

Penalty

Initial $319 · Current $319

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:     Everardo Rojas dba Everardo Rojas, failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:   Citation Number            Item Number                    Abatement Date  01                                01                                   01/25/2019  01                                02                                   01/25/2019  01                                03a                                   01/25/2019  01                                03b                                    01/25/2019  01                                04                                        01/25/2019  02                                01                                        01/25/2019  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF THE CORRECTIVE ACTION WORKSHEET).

Issued

Jan 18, 2019

Abate by

Jan 25, 2019

Penalty

Initial $2,217 · Current $2,217

General-duty citation text

29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection when machines or operations present potential eye or face injury from physical, chemical, or radiation agents:               a) On or about September 13, 2018, employees were exposed to eye injury while operating nail guns without the benefit of eye protection.              In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Jan 18, 2019

Abate by

Jan 25, 2019

Penalty

Initial $3,326 · Current $3,326

General-duty citation text

29 CFR 1926.451(e)(1): Safe access was not provided to scaffold platforms when the platforms were more than 2 feet (0.6 m) above or below a point of access:         a) On or about September 13, 2018, employees were not provided with safe access to scaffolding from which they were required to work at an elevation of approximately 11 feet.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Jan 18, 2019

Abate by

Jan 25, 2019

Penalty

Initial $3,880 · Current $3,880

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):      a) On or about September 13, 2018, employees were exposed to the hazard of falling while working from a pitched roof having a ground to eave height of approximately 12 feet without the use of fall protection.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Jan 18, 2019

Abate by

Jan 25, 2019

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.451(g)(1)(i): Each employee on a boatswains' chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold was not protected by a personal fall arrest system:         a) On or about September 13, 2018, employees were exposed to the hazard of falling approximately 11 feet while working from ladder jack scaffolding without the benefit of fall protection.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Jan 18, 2019

Abate by

Jan 25, 2019

Penalty

Initial $2,217 · Current $2,217

General-duty citation text

29 CFR 1926.1053(b)(5)(i): Non-self-supporting ladder(s) were not used at an angle such that the horizontal distance from the top support to the foot of the ladder was approximately one-quarter of the working length of the ladder:       a) On or about September 13, 2018, the horizontal distances (angle) from the top supports to the feet of a non-self-supporting ladder used for the support of, and access to and from, a ladder jack scaffolding was greater than one-quarter of the working length of the ladder.       In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Jan 18, 2019

Abate by

Jan 25, 2019

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.503(b)(1): The employer did not verify fall protection training by preparing a written certification record:             a) On or about September 13, 2018, the employer did not prepare written certification records related to employee fall protection training.            In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).