MIDLAND, TX —
OSHA Inspection: RG WELDING OIL FIELD SERVICES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RG WELDING OIL FIELD SERVICES in 5309 S. CO RD 1210, MIDLAND, TX 79706 (NAICS 332312). OSHA activity number 343483228.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RG WELDING OIL FIELD SERVICES
- Site address
- 5309 S. CO RD 1210
- City
- MIDLAND
- State
- TX
- ZIP
- 79706
- Mailing
- 5309 S. CO RD 1210, MIDLAND, TX 79706
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 20
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.178 P01
- Issued
- Mar 8, 2019
- Abate by
- Apr 3, 2019
- Penalty
- Initial $4,546 · Current $2,728 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): a) At the facility, a Komatsu powered industrial truck with holes in the forks was not removed from service, exposing employees to struck-by and caught-in-between hazards.
Recent events (2)
- — I (S) $2727.6
- — Z (S) $4546
1910.305 G02 III
- Issued
- Mar 8, 2019
- Abate by
- Apr 3, 2019
- Penalty
- Initial $3,031 · Current $1,819 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: a) At the facility, the flexible cord of the DeWalt 6" angle grinder, serial number 028638, lacked strain relief, exposing bare conductors.
Recent events (2)
- — I (S) $1818.6
- — Z (S) $3031
1910.37 B02
- Issued
- Mar 8, 2019
- Abate by
- Apr 3, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": a) At the facility, the North exit door to shop was not marked by a sign reading "Exit." b) At the facility, the South exit door to shop was not marked by a sign reading "Exit.".
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 C01
- Issued
- Mar 8, 2019
- Abate by
- Apr 3, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: a) On the southeast I-Beam a portable fire extinguisher was missing. b) On the Komatsu powered industrial truck a portable fire extinguisher was missing.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at RG Welding OIL Field Services
View RG Welding OIL Field Services's full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343483228.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.