AURORA, CO —
OSHA Inspection: J.E.R. CONSTRUCTION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of J.E.R. CONSTRUCTION in 5827 S LISBON WAY, AURORA, CO 80015 (NAICS 238160). OSHA activity number 343494829.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J.E.R. CONSTRUCTION
- Site address
- 5827 S LISBON WAY
- City
- AURORA
- State
- CO
- ZIP
- 80015
- Mailing
- 1530 S IRVING ST, DENVER, CO 80219
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 5
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.102 A01
- Issued
- Oct 11, 2018
- Abate by
- Oct 17, 2018
- Penalty
- Initial $2,217 · Current $1,331 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: (a) On or about August 11, 2016, employees were exposed to eye injury while working with and around pneumatic nail guns without eye protection. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $1331
- — Z (S) $2217
1926.501 B13
- Issued
- Oct 11, 2018
- Abate by
- Oct 19, 2018
- Penalty
- Initial $3,880 · Current $2,329 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b): (a) On or about August 3, 2018, J.E.R. Construction, as the exposing employer, did not ensure employees who were required to engage in re-roofing operations on a residential house, were protected from exposure to fall hazards of eight feet and greater. Abatement Note: Abatement certification and documentation is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $2329
- — Z (S) $3880
1926.502 D17
- Issued
- Oct 11, 2018
- Abate by
- Oct 17, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.502(d)(17): The attachment point of the body harness was not located in the center of the wearer's back near shoulder level, or above the wearer's head: (a) On or about August 3, 2018, and at times prior, employer did not ensure that employees were properly using their personal fall arrest systems in that an employee was not tied-off from his harness' D-ring but instead a portion of the harness located on his right front side.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.503 A02 III
- Issued
- Oct 11, 2018
- Abate by
- Oct 19, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(2)(iii): The employer did not assure that each employee had been trained, as necessary, by a competent person in the use and operation of guardrail systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used: (a) On or about August 3, 2018, the employer did not ensure that employees were trained on how to properly use personal fall arrest systems in that an employee was not tied-off from his harness' D-ring but instead a portion of the harness located on his right front side. Abatement Note: Abatement certification is required for this item (See enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1053 B01
- Issued
- Oct 11, 2018
- Abate by
- Oct 17, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed: (a) On or about August 3, 2018, the employer did not ensure employees safely used a ladder in that the ladder was not extended three feet above the landing surface. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 238160)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343494829.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.