BOISE, ID ·
OSHA Inspection: OREPAC BUILDING PRODUCTS (INTERNATIONAL), INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of OREPAC BUILDING PRODUCTS (INTERNATIONAL), INC. in 5500 FEDERAL WAY, BOISE, ID 83716 (NAICS 321999). OSHA activity number 343498978.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- OREPAC BUILDING PRODUCTS (INTERNATIONAL), INC.
- Site address
- 5500 FEDERAL WAY
- City
- BOISE
- State
- ID
- ZIP
- 83716
- Mailing
- 30170 SW OREPAC AVE, WILSONVILLE, OR 97070
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321999
- Employees
- 82
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 7, 2018
- Abate by
- Apr 23, 2019
- Penalty
- Initial $12,934 · Current $0 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: a) Door shop: On or about September 28, 2018 and at times prior thereto; duct work leading into and out of the LMC dust collector bag system, which posed a fire/deflagration hazard, lacked fire/deflagration isolation devices to prevent a fire/deflagration in the collector from travelling back into work areas. b) Door shop: On or about September 28, 2018 and at times prior thereto; dust from woodworking equipment with ignition hazards was carried to dust collector inside ductwork that had no spark detection or fire suppression. Abatement certification AND documentation ARE required for this item.
Recent events (2)
- · I (S) $0
- · Z (S) $12934
1910.22 A01
- Issued
- Dec 7, 2018
- Abate by
- Mar 12, 2019
- Penalty
- Initial $7,391 · Current $7,391
General-duty citation text
29 CFR 1910.22(a)(1): (1) All places of employment, passageways, storerooms, service rooms, and walking-working surfaces were not kept in a clean, orderly, and sanitary condition. a) Door shop: On or about September 28, 2018 and at times prior thereto; accumulations of wood and MDF dust, Class II, combustible dust generated during the fabrication process had settled on equipment surfaces, motor and exterior of the collection bags and drums of the LMC dust collection system. Note* Abatement certification IS required for this item.
Recent events (2)
- · I (S) $7391
- · Z (S) $7391
1910.22 A02
- Issued
- Dec 7, 2018
- Abate by
- Apr 23, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(2): (2) The floor of each workroom was not maintained in a clean and, to the extent feasible, in a dry condition. a) Door shop: On or about September 28, 2018 and at times prior thereto; accumulations of wood and MDF, Class II, combustible dust generated during the fabrication process had settled on the floor area in front of and behind the LMC dust collection system in one to eight inch piles. Note* Abatement certification IS required for this item.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 321999)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343498978.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.