HERMANN, MO —
OSHA Inspection: MOORE GEAR & MANUFACTURING CO. INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MOORE GEAR & MANUFACTURING CO. INC. in #2 HAWTHORNE DRIVE, HERMANN, MO 65041 (NAICS 333612). OSHA activity number 343501276.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MOORE GEAR & MANUFACTURING CO. INC.
- Site address
- #2 HAWTHORNE DRIVE
- City
- HERMANN
- State
- MO
- ZIP
- 65041
- Mailing
- P.O. BOX 49, HERMANN, MO 65041
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333612
- Employees
- 81
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.29 B02
- Issued
- Oct 16, 2018
- Abate by
- Dec 4, 2018
- Penalty
- Initial $6,467 · Current $3,234 Reduced
General-duty citation text
29 CFR 1910.29(b)(2): (2) Midrails, screens, mesh, intermediate vertical members, solid panels, or equivalent intermediate members were not installed between the walking-working surface and the top edge of the guardrail system: At #2 Hawthorne Drive, Hermann, Missouri, specifically inside of the Office Area, the guardrail that paralleled the open sided edge of a storage loft was not equipped with a mid-rail. The length and width of this guardrail measured approximately 65 feet by 43 feet respectively. The fall distance to the concrete floor below was approximately 15 feet. This violation was noted on 10/05/18.
Recent events (2)
- — I (S) $3233.5
- — Z (S) $6467
1910.29 F04
- Issued
- Oct 16, 2018
- Abate by
- Dec 4, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.29(f)(4): The opening in a stair rail system exceeded 19 inches (48 cm) at its least dimension: At #2 Hawthorne Drive, Hermann, Missouri, specifically in the Office Area, the stair rail system was missing an intermediate rail. The distance between the top rail and the tread measured approximately 32 inches. The wooden flight of stairs consisted of 14 risers. This violation was noted on 10/05/18.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Oct 16, 2018
- Abate by
- Dec 4, 2018
- Penalty
- Initial $6,467 · Current $3,234 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: At #2 Hawthorne Drive, Hermann, Missouri, specifically inside of the Turning Department, the rotating parts belonging to the Manhattan Drill Press, m/n 951210, s/n 210491, were unguarded. This violation was noted on 10/05/18.
Recent events (2)
- — I (S) $3233.5
- — Z (S) $6467
1910.212 A03 II
- Issued
- Oct 16, 2018
- Abate by
- Dec 4, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): At #2 Hawthorne Drive, Hermann, Missouri, specifically inside of the Hobbing Department, the point-of-operation belonging to the Fellows Gear Sharpener, m/n 36, s/n 34202, was unguarded. This violation was noted on 10/05/18.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B01 II
- Issued
- Oct 16, 2018
- Abate by
- Dec 4, 2018
- Penalty
- Initial $3,880 · Current $1,940 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: At #2 Hawthorne Drive, Hermann, Missouri, specifically inside of the Cutting Department, the 480 volt electrical energy disconnect belonging to the Hydraulic Straightener Press was missing a knockout. This violation was noted on 10/05/18.
Recent events (2)
- — I (S) $1940
- — Z (S) $3880
More inspections at Moore Gear & Manufacturing CO. INC.
View Moore Gear & Manufacturing CO. INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333612)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343501276.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.