Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DAVE'S WORLD

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of DAVE'S WORLD in 16 SUMMER ST., DOVER FOXCROFT, ME 04426 (NAICS 238220). OSHA activity number 343501540.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Dave'S World — free Get an email when a new federal OSHA severe-injury report for Dave'S World is published. One employer, no account, unsubscribe in one click.
Establishment
DAVE'S WORLD
Site address
16 SUMMER ST.
City
DOVER FOXCROFT
State
ME
ZIP
04426
Mailing
16 SUMMER ST., DOVER FOXCROFT, ME 04426
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238220
Employees
49
Ownership type
A

7 citations on file for this inspection.

1910.23 B10

Serious Gravity 5 1 instance 3 exposed
Issued
Oct 25, 2018
Penalty
Initial $7,760 · Current $3,880 Reduced
29 CFR 1910.23(b)(10): The employer did not ensure any ladder with structural or other defects was immediately tagged "Dangerous: Do Not Use" or with similar language in accordance with 1910.145 and removed from service until repaired in accordance with 1910.22(d), or replaced:  Service Van - The Werner ladder with broken bracing was not removed from service or marked with the appropriate signage.
Recent events (2)
  • — I (S) $3880
  • — Z (S) $7760

1910.30 B01

Serious Gravity 5 1 instance 30 exposed
Issued
Oct 25, 2018
Abate by
Nov 8, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.30(b)(1): The employer did not train each employee on or before May 17, 2017 in the proper care, inspection, storage, and use of equipment covered by this subpart before an employee uses the equipment:  Facility - The employer did not train its employees in the proper care, inspection, storage, and use of ladders before being allowed to use ladders.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.110 F02 II

Serious Gravity 1 1 instance 5 exposed
Issued
Oct 25, 2018
Abate by
Nov 2, 2018
Penalty
Initial $3,880 · Current $1,940 Reduced
29 CFR 1910.110(f)(2)(ii): Containers when stored inside were located near exits, stairways, or in areas normally used or intended for the safe exit of people:  Warehouse - A spare LP Gas cylinder for the forklift was stored near the exit of the warehouse.
Recent events (2)
  • — I (S) $1940
  • — Z (S) $3880

1910.157 E02

Serious Gravity 1 1 instance 40 exposed
Issued
Oct 25, 2018
Abate by
Nov 2, 2018
Penalty
Initial $3,880 · Current $1,940 Reduced
29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly:  Facility - Seven Amerex fire extinguishers were not visually inspected at least monthly.
Recent events (2)
  • — I (S) $1940
  • — Z (S) $3880

1910.178 M05 I

Serious Gravity 5 1 instance 4 exposed
Issued
Oct 25, 2018
Penalty
Initial $4,398 · Current $2,199 Reduced
29 CFR 1910.178(m)(5)(i): When a powered industrial truck was left unattended, load engaging means were not fully lowered, controls were not neutralized, power was not shut off, or brakes were not set:  Warehouse - The Toyota forklift was left unattended without the parking brakes being set.
Recent events (2)
  • — I (S) $2199
  • — Z (S) $4398

1910.178 Q06

Serious Gravity 1 1 instance 5 exposed
Issued
Oct 25, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.178(q)(6): Powered industrial trucks were altered so that the relative positions of the various parts were different from what they were when originally received from the manufacturer, by the addition of extra parts not provided by the manufacturer, or by the elimination of any parts without the manufacturer's approval:  Warehouse- The fuel tank position on the Toyota, 2500 pound capacity forklift was changed so that it was not aligned properly as per manufacturer's specifications.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.503 B01

Other-than-serious 1 instance 20 exposed
Issued
Oct 25, 2018
Abate by
Nov 8, 2018
Penalty
Initial $0 · Current $0
29 CFR 1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer:  Facility - The employer did not have certification of fall hazard training for the employees who were engaged in the installation of new equipment.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Dave'S World's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343501540.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.