Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: OMAR ANGEL ALFORO SANCHEZ

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of OMAR ANGEL ALFORO SANCHEZ in 601 JAYDEN DRIVE, TRUSSVILLE, AL 35173 (NAICS 238990). OSHA activity number 343514204.

Watch Omar Angel Alforo Sanchez — free Get an email when a new federal OSHA severe-injury report for Omar Angel Alforo Sanchez is published. One employer, no account, unsubscribe in one click.
Site address
601 JAYDEN DRIVE
City
TRUSSVILLE
State
AL
ZIP
35173
Mailing
1831 11TH STREET N, BESSEMER, AL 35020
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238990
Employees
1
Ownership type
A

5 citations on file for this inspection.

1926.451 G01 I

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $3880.00 · Current $2328.00 Reduced
29 CFR 1926.451(g)(1)(i): Each employee on a boatswains' chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold was not protected by a personal fall arrest system:    (a) On or about 10/04/2018 - 601 Jayden Drive Trussville, AL, employees working from ladder jack scaffolding were exposed to fall hazards of approximately 17 feet, 10 inches.
Recent events (2)
  • — I (S) $2328
  • — Z (S) $3880

1926.454 A

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:  (a) On or about 10/04/2018 - 601 Jayden Drive, Trussville, AL, an employee working from a ladder jack scaffolding had not been trained.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.452 K03

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $3880.00 · Current $2328.00 Reduced
29 CFR 1926.452(k)(3): The ladder jack was not designed and constructed to bear on the side rails and ladder rungs or on the ladder rungs alone. If bearing on the ladder rungs only, the bearing area did not include a length of at least 10 inches (25.4 cm) on each rung:    (a) On or about 10/04/2018 - 601 Jayden Drive Trussville, AL, the bearing area of the ladder jack scaffolding bearing on the ladder rungs did not include a length of 10 inches or more on each rung.
Recent events (2)
  • — I (S) $2328
  • — Z (S) $3880

1926.452 K04

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.452(k)(4): Ladders used to support ladder jacks were not placed, fastened, or equipped with devices to prevent slipping:  (a) On or about 10/04/2018 - 601 Jayden Drive Trussville, AL, the ladders used to support the ladder jack scaffolding were not secured.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1060 A

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3880.00 · Current $2328.00 Reduced
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would train each employee in the procedures to be followed to minimize hazards related to ladders and stairways:    (a) On or about 10/04/2018 - 601 Jayden Drive Trussville, AL, an employee installing siding had not been trained on ladder safety exposing him to fall hazards of approximately 17 feet, 10 inches while working from ladders.
Recent events (2)
  • — I (S) $2328
  • — Z (S) $3880

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343514204.