Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BANKSTON LUMBER COMPANY, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of BANKSTON LUMBER COMPANY, INC. in 941 VETERAN'S PARKWAY, BARNESVILLE, GA 30204 (NAICS 321213). OSHA activity number 343517132.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Bankston Lumber Company, INC. — free Get an email when a new federal OSHA severe-injury report for Bankston Lumber Company, INC. is published. One employer, no account, unsubscribe in one click.
Site address
941 VETERAN'S PARKWAY
City
BARNESVILLE
State
GA
ZIP
30204
Mailing
941 VETERAN'S PARKWAY, BARNESVILLE, GA 30204
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321213
Employees
29
Ownership type
A

5 citations on file for this inspection.

1910.132 A

Serious Gravity 1 1 instance 2 exposed
Issued
Mar 11, 2019
Penalty
Initial $3,978 · Current $2,387 Reduced
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered:  1) Truss Department: On or about October 2, 2018, the employer exposed employees to eye injuries while using the nail gun on the truss table saw to cut wood without proper personal protective equipment such as a safety glasses.
Recent events (2)
  • — I (S) $2386.8
  • — Z (S) $3978

1910.147 C04 I

Serious Gravity 1 1 instance 2 exposed
Issued
Mar 11, 2019
Abate by
Apr 4, 2019
Penalty
Initial $3,978 · Current $2,387 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  1) Truss Department: On or about October 2, 2018, the employer exposed employees to caught-in hazards, in that lockout/tagout procedures were not developed and implemented on the truss table saw, when employees have to change the blades.
Recent events (2)
  • — I (S) $2386.8
  • — Z (S) $3978

1910.147 C07 I

Serious Gravity 1 1 instance 2 exposed
Issued
Mar 11, 2019
Abate by
Apr 4, 2019
Penalty
Initial $3,978 · Current $2,387 Reduced
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees:  1) Truss Department: On or about October 2, 2018, the employer exposed employees to a nip point hazard, in that lockout/tagout training has not been conducted on all of the employees operating the truss table saw and radial arm saw.
Recent events (2)
  • — I (S) $2386.8
  • — Z (S) $3978

1910.178 L06

Serious Gravity 1 1 instance 2 exposed
Issued
Mar 11, 2019
Penalty
Initial $3,978 · Current $2,387 Reduced
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  1) Yard Area: On or about October 2, 2018, the employer exposed an employee to struck-by hazards by not certifying or evaluating employees operating the Toyota model 7FDAU50 and serial 60452 to load and unload equipment.
Recent events (2)
  • — I (S) $2386.8
  • — Z (S) $3978

1910.1200 H01

Other-than-serious 1 instance 3 exposed
Issued
Mar 11, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided information and training on hazardous chemicals or materials in their work area at the time of their initial assignment and whenever a new hazard was introduced into their work area:  1) Yard Area: On or about October 2, 2018, the employer exposed employees to burn hazards in that training had not been provided to the employees on the hazardous chemicals used on a daily basis, such as but not limited to propane.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343517132.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.