WASHINGTON, DC —
OSHA Inspection: DA ROCHA CONCRETE, LLC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DA ROCHA CONCRETE, LLC. in 1236 SHEPHERD STREET, NW, WASHINGTON, DC 20011 (NAICS 236118). OSHA activity number 343526653.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DA ROCHA CONCRETE, LLC.
- Site address
- 1236 SHEPHERD STREET, NW
- City
- WASHINGTON
- State
- DC
- ZIP
- 20011
- Mailing
- 1610 OLNEY SANDY SPRING ROAD UNIT 1, SANDY SPRING, MD 20860
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236118
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.95 A
- Issued
- Jan 17, 2019
- Abate by
- Jan 24, 2019
- Penalty
- Initial $1,663 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.95(a): Personal protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, was not provided, used, or maintained in a sanitary and reliable condition it was necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation, or physical contact: a) Third Floor Balcony - An employee was using a Bosch hammer drill, serial number 11264EVS, to chip through a brick wall and was not wearing eye protection, on or about 10/11/2018. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (2)
- — I (S) $1000
- — Z (S) $1663
1926.502 D16 III
- Issued
- Jan 17, 2019
- Abate by
- Jan 24, 2019
- Penalty
- Initial $1,663 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.502(d)(16)(iii): Personal fall arrest systems, when stopping a fall, were not rigged such that an employee could not free fall more than 6 feet (1.8 m) nor contact any lower level: a) Third Floor Balcony - An employee was standing on a balcony while chipping a doorway through a brick wall and the lanyard attached to the body harness was rigged so that in the event of a fall the employee could have fallen at least 9 and a half feet, on or about 10/11/2018. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (2)
- — I (S) $1000
- — Z (S) $1663
1926.1051 A
- Issued
- Jan 17, 2019
- Abate by
- Jan 24, 2019
- Penalty
- Initial $1,663 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.1051(a): Stairway(s) or ladder(s) were not provided at all personnel points of access where there was a break in elevation of 19 inches (48 cm) or more, or no ramp, runway, sloped embankment, or personnel hoist was provided: a) Third Floor Balcony - An employee was observed climbing through a window opening and there was a 29 inch drop onto the balcony work platform, on or about 10/11/2018. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (2)
- — I (S) $1000
- — Z (S) $1663
1926.404 B01 I
- Issued
- Jan 17, 2019
- Abate by
- Jan 24, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(b)(1)(i): Employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites: a) Third Floor Balcony - An employee was using an extension cord to supply power to a Bosch Hammer Drill, serial number 11264EVS, and a ground fault circuit interrupter was not provided, 110v/15amp service, on or about 10/11/2018. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 236118)
More inspections in DC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343526653.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.