ALPHARETTA, GA ·
OSHA Inspection: STONECREEK MASONRY LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of STONECREEK MASONRY LLC in 515 HEADWIND WAY, ALPHARETTA, GA 30009 (NAICS 238140). OSHA activity number 343532081.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STONECREEK MASONRY LLC
- Site address
- 515 HEADWIND WAY
- City
- ALPHARETTA
- State
- GA
- ZIP
- 30009
- Mailing
- 1506 CHASEWAY CIRCLE, POWDER SPRINGS, GA 30127
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 9
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Dec 20, 2018
- Penalty
- Initial $2,217 · Current $1,330 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles: (a) New townhome construction located on Lot #20, Scaffold located on north side of structure: On or about 10/12/2018, and at times prior, employees were exposed to struck-by hazards while operating a STIHL 14-inch Cut-Off Saw, in that protective eyewear was not provided to employees cutting bricks with a masonry saw.
Recent events (2)
- · I (S) $1330
- · Z (S) $2217
1926.1153 C01
- Issued
- Dec 20, 2018
- Penalty
- Initial $2,772 · Current $1,661 Reduced
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section: (a) New townhome construction located on Lot #20, North side of structure: On or about 10/12/2018, and at times prior, the employer exposed employees to silica exposure while cutting bricks, in that the Stihl 14-inch cut-off saw equipped with integrated water delivery system was not used while dry cutting bricks on the tubular welded scaffold platform.
Recent events (2)
- · I (S) $1661
- · Z (S) $2772
1926.1153 D02 I
- Issued
- Dec 20, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: (a) New townhome construction located on Lot #20, Scaffold located on north side of structure: On or about 10/12/2018, and at times prior, employees were permitted to perform outdoor brick cutting operations on the scaffold platform using a Stihl 14-inch cut-off saw and another employee was permitted to walk and work in close proximity to the cutting area.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.451 G01 VII
- Issued
- Dec 20, 2018
- Penalty
- Initial $4,435 · Current $2,661 Reduced
General-duty citation text
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section: (a) New townhome construction located on Lot #20, Scaffold located on the north side of the structure: On or about 10/12/2018, and at times prior, the employer exposed employees to falls of over 13-feet, 10-inches to the lower level, in that a fall protection system was not provided on the open ends of the walking/working platform. StoneCreek Masonry, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.451(g)(1)(vii), which was contained in OSHA inspection number 942544, citation number 1, item number 2 and was affirmed as a final order on 03/03/2014, with respect to a workplace located at 4472 Sterling Point Drive, Kennesaw, GA 30152.
Recent events (2)
- · I (R) $2661
- · Z (R) $4435
More inspections in this industry (NAICS 238140)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343532081.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.