Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PRESTIGE CASTING, INC.

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of PRESTIGE CASTING, INC. in 2009 S DARTMOUTH ST, ENGLEWOOD, CO 80110 (NAICS 331529). OSHA activity number 343533659.

Watch Prestige Casting, INC. — free Get an email when a new federal OSHA severe-injury report for Prestige Casting, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2009 S DARTMOUTH ST
City
ENGLEWOOD
State
CO
ZIP
80110
Mailing
2009 S DARTMOUTH ST, ENGLEWOOD, CO 80110
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331529
Employees
16
Ownership type
A

5 citations on file for this inspection.

1910.134 C01

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2217.00 · Current $1200.00 Reduced
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:    (a) On or about October 10, 2018, and at times prior, the employer did not ensure that a written respiratory program was in place for employees required to wear a half face respirator during the addition of flux to the furnaces.    Abatement note:  Abatement certification is required for this item (See Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2217

1910.134 E01

Serious Gravity 1 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  (a) On or about October 10, 2018, and at times prior, the employer did not ensure that employees wearing respirators both required and comfort use were evaluated for medical fitness prior to use.    Abatement note:  Abatement certification is required for this item (See Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 F02

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:  (a) On or about October 10, 2018, and at times prior, the employer did not ensure that employees required to wear tight fitting half face respirators during the addition of flux to the furnaces were properly fit tested prior to use.    Abatement note:  Abatement certification is required for this item (See Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 K06

Serious Gravity 1 3 instances 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:  (a) On or about October 10, 2018, and at times prior, the employer did not ensure that employees wearing comfort use respirators were provided Appendix D or the equivalent, containing information on the use, care, and storage of respirators.   Abatement note:  Abatement certification is required for this item (See Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1053 D01

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1053(d)(1): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2) or the scheduled monitoring option in paragraph (d)(3) of this section:  a) On or about October 10, 2018, and at times prior, the employer did not assess the exposure of employees working with HA International Metal Flux, which contains approximately 10 to 20 percent quartz (crystalline silica).    Abatement note: Abatement certification is required for this item (See Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View PRESTIGE CASTING, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343533659.