LAKE WALES, FL —
OSHA Inspection: MIDGARD, INC. OF FLORIDA
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of MIDGARD, INC. OF FLORIDA in 6402 STATE ROAD 60 EAST, LAKE WALES, FL 33898 (NAICS 326199). OSHA activity number 343534319.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MIDGARD, INC. OF FLORIDA
- Site address
- 6402 STATE ROAD 60 EAST
- City
- LAKE WALES
- State
- FL
- ZIP
- 33898
- Mailing
- 6402 STATE ROAD 60 EAST, LAKE WALES, FL 33898
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 12
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 A01
- Issued
- Jan 3, 2019
- Abate by
- Jan 30, 2019
- Penalty
- Initial $2,217 · Current $1,330 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): (1) All places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition. a) On or about October 11, 2018, in the injection molding press areas, electrical extension cords were throughout the flooring where employees walked and worked, exposing employees to tripping hazards.
Recent events (2)
- — I (S) $1330.2
- — Z (S) $2217
1910.147 C04 I
- Issued
- Jan 3, 2019
- Abate by
- Jan 30, 2019
- Penalty
- Initial $3,696 · Current $2,218 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about October 11, 2018, in the injection molding press area, for employees authorized to do service and maintenance of machine and equipment's such as but not limited to injection molding press machines.
Recent events (2)
- — I (S) $2217.6
- — Z (S) $3696
1910.305 G01 IV A
- Issued
- Jan 3, 2019
- Abate by
- Jan 30, 2019
- Penalty
- Initial $3,696 · Current $2,218 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a) On or about October 11, 2018, at the injection molding press area, for flexible extension cords used to connect the one shoot loaders for injection molding presses 3, 4 and 6.
Recent events (2)
- — I (S) $2217.6
- — Z (S) $3696
1910.1200 E01
- Issued
- Jan 3, 2019
- Abate by
- Jan 30, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) On or about October 11, 2018, a written hazard communication program had not been developed and implemented for employees handling chemicals such as but not limited to fiberglass-reinforced polypropylene preparation for injection molding.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H01
- Issued
- Jan 3, 2019
- Abate by
- Jan 30, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) On or about October 11, 2018, for employees handling chemicals such as but not limited to fiberglass-reinforced polypropylene preparation for injection molding.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Midgard, INC. of Florida
View Midgard, INC. of Florida's full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343534319.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.