WRIGHT PATTERSON AFB, OH —
OSHA Inspection: C. MARTIN COMPANY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of C. MARTIN COMPANY, INC. in BUILDING 620, WRIGHT PATTERSON AFB, OH 45433 (NAICS 238220). OSHA activity number 343535753.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C. MARTIN COMPANY, INC.
- Site address
- BUILDING 620
- City
- WRIGHT PATTERSON AFB
- State
- OH
- ZIP
- 45433
- Mailing
- 2130 MONAHAN WAY BUILDING 57 ROOM 1, WRIGHT PATTERSON AFB, OH 45433
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238220
- Employees
- 42
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Dec 13, 2018
- Abate by
- Feb 1, 2019
- Penalty
- Initial $12,934 · Current $12,934
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section. a) On October 6th, 2018 the employer did not ensure that energy control procedures for the air handler units were documented and utilized by employees prior to allowing them to engage in maintenance activities on the air handler units.
Recent events (2)
- — I (S) $12934
- — Z (S) $12934
1910.147 C07 I
- Issued
- Dec 13, 2018
- Abate by
- Feb 1, 2019
- Penalty
- Initial $12,934 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following: 1) The training provided by the employer was inadequate in that employees were not trained on knowledge and skills required to safely isolate and remove the residual energy presented by the free spinning belt on Air Handler Unit #45.
Recent events (2)
- — I (S) $0
- — Z (S) $12934
1910.147 D
- Issued
- Dec 13, 2018
- Abate by
- Feb 1, 2019
- Penalty
- Initial $12,934 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: b) On or about October 6, 2018 on Air Handler Unit #46 located in Building 620 employees, such as HVAC technicians troubleshooting and performing maintenance activities were not required to: (1) turn off and shut down the machines, (2) physically locate and operate energy isolating devices in such a manner as to isolate the machine or equipment from the electric and residual energy sources, (3) affix lockout or tagout devices to each energy isolating device, (4) verify effectiveness of energy isolation.
Recent events (2)
- — I (S) $0
- — Z (S) $12934
1910.147 C05 I
- Issued
- Dec 13, 2018
- Abate by
- Feb 1, 2019
- Penalty
- Initial $12,934 · Current $6,467 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware shall be provided by the employer for isolating, securing or blocking of machines or equipment from energy sources. a) On October 6, 2018 employees were not provided with hardware that would isolate the residual energy source of the free spinning belt on air Handler #36.
Recent events (2)
- — I (S) $6467
- — Z (S) $12934
More inspections at C. Martin Company, INC.
View C. Martin Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238220)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343535753.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.