LENOX, MA —
OSHA Inspection: ANTHONY MURAD
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ANTHONY MURAD in 203 WALKER ST, LENOX, MA 01240 (NAICS 236118). OSHA activity number 343539474.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ANTHONY MURAD
- Site address
- 203 WALKER ST
- City
- LENOX
- State
- MA
- ZIP
- 01240
- Mailing
- PO BOX 811, NEW LEBANON, NY 12125
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236118
- Employees
- 9
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.304 H01
- Issued
- Jan 4, 2019
- Abate by
- Jan 10, 2019
- Penalty
- Initial $3,880 · Current $1,940 Reduced
General-duty citation text
29 CFR 1926.304(h)(1): Each circular crosscut table saw was not guarded by a hood which shall meet all the requirements of paragraph (i)(1) of this section for hoods for circular ripsaws: a) 203 Walker St., Lenox, MA: On or about October 17, 2018, an employee was using a portable DeWalt table saw to cut wood without any guard or hood on the saw blade. Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29CFR1903.19(d)(1).
Recent events (2)
- — I (S) $1940
- — Z (S) $3880
1926.403 B02
- Issued
- Jan 4, 2019
- Abate by
- Jan 10, 2019
- Penalty
- Initial $2,217 · Current $1,109 Reduced
General-duty citation text
29 CFR 1926.403(b)(2): Listed, labeled, and/or certified equipment was not installed and/or used in accordance with instructions included in the listing, labeling, and/or certification: a) 203 Walker St., Lenox, MA: On or about October 17, 2018, an employee was using a portable DeWalt table saw which was powered through multiple extension cords plugged together in parallel.
Recent events (2)
- — I (S) $1108.5
- — Z (S) $2217
1926.405 G02 IV
- Issued
- Jan 4, 2019
- Abate by
- Jan 10, 2019
- Penalty
- Initial $2,217 · Current $1,109 Reduced
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief was provided which will prevent pull from being directly transmitted to joints or terminal screws: a) 203 Walker St., Lenox, MA: On or about October 17, 2018, an employee was using an extension cord to power a DeWalt brand worm drive circular saw that had no strain relief.
Recent events (2)
- — I (S) $1108.5
- — Z (S) $2217
1926.501 B13
- Issued
- Jan 4, 2019
- Abate by
- Jan 10, 2019
- Penalty
- Initial $3,880 · Current $1,940 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels was not protected by guardrail systems, safety net system, or personal fall arrest system: a) 203 Walker St., Lenox, MA: On or about October 17, 2018, an employee was observed framing a new second story form the existing roof, more than 12 feet above the ground below without any fall protection. Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29CFR1903.19(d)(1).
Recent events (2)
- — I (S) $1940
- — Z (S) $3880
1926.1053 B01
- Issued
- Jan 4, 2019
- Abate by
- Jan 10, 2019
- Penalty
- Initial $2,772 · Current $1,386 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): When portable ladders are used for access to an upper landing surface, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access: a) 203 Walker St., Lenox, MA: On or about October 17, 2018, an employee was observed using a portable extension ladder to access his roof top work location that did not extend the required 3 feet past the upper landing surface.
Recent events (2)
- — I (S) $1386
- — Z (S) $2772
More inspections in this industry (NAICS 236118)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343539474.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.