NORTHAMPTON, MA —
OSHA Inspection: WRIGHT ARCHITECTURAL MILLWORK, CORP.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WRIGHT ARCHITECTURAL MILLWORK, CORP. in 115 INDUSTRIAL DRIVE, NORTHAMPTON, MA 01060 (NAICS 337212). OSHA activity number 343550596.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WRIGHT ARCHITECTURAL MILLWORK, CORP.
- Site address
- 115 INDUSTRIAL DRIVE
- City
- NORTHAMPTON
- State
- MA
- ZIP
- 01060
- Mailing
- 115 INDUSTRIAL DRIVE, NORTHAMPTON, MA 01060
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337212
- Employees
- 48
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A03 II
- Issued
- Dec 27, 2018
- Penalty
- Initial $3,880 · Current $1,940 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): Workroom floor, Wright Architectural Millwork, Corp., 115 Industrial Dr., Northampton, Massachusetts; On and before October 23, 2018, employees used the Knuth drill press without a guard at the point of operation exposing them to laceration and struck by hazards.
Recent events (2)
- — I (S) $1940
- — Z (S) $3880
1910.212 B
- Issued
- Dec 27, 2018
- Penalty
- Initial $5,497 · Current $2,749 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: Wright Architectural Millwork, Corp., 115 Industrial Dr., Northampton, Massachusetts; On and before October 23, 2018, the 14 inch Rockwell bandsaw was mounted on a rolling dolly to allow it to move around the shop. The saw is operated on the dolly which does not prevent walking or moving while in operation.
Recent events (2)
- — I (S) $2748.5
- — Z (S) $5497
1910.213 C01
- Issued
- Dec 27, 2018
- Penalty
- Initial $3,298 · Current $1,649 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: Wright Architectural Millwork, Corp., 115 Industrial Dr., Northampton, Massachusetts; On and prior to October 23, 2018 employees were exposed to laceration hazards from table saws where the saw blades did not have guards in use. a. Slide saw did not have the guard in use when making cuts. b. None of the five (5) SawStop table saws had guards in place.
Recent events (2)
- — I (S) $1649
- — Z (S) $3298
1910.213 C02
- Issued
- Dec 27, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: Wright Architectural Millwork, 115 Industrial Dr., Northampton, Massachusetts; On and before October 23, 2018 employees operated the five SawStop table saws without having a spreader to prevent material from squeezing the saw or being thrown back on the operator. Employees were exposed to struck by hazards from wood being thrown back at them while operating the SawStop table saws.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Dec 27, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: Wright Architectural Millwork, Corp., 115 Industrial Dr., Northampton, Massachusetts; On and prior to October 23, 2018 employees were exposed to struck by hazards from material being cut on the five SawStop table saws that did not have anti-kickback devices in use.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Wright Architectural Millwork, Corp.
View Wright Architectural Millwork, Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 337212)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343550596.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.