Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MULTIPAC, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MULTIPAC, INC. in 1010 PORTWEST DR., SAINT CHARLES, MO 63303 (NAICS 322212). OSHA activity number 343555769.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Multipac, INC. — free Get an email when a new federal OSHA severe-injury report for Multipac, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
MULTIPAC, INC.
Site address
1010 PORTWEST DR.
City
SAINT CHARLES
State
MO
ZIP
63303
Mailing
1010 PORTWEST DR., SAINT CHARLES, MO 63303
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
322212
Employees
37
Ownership type
A

3 citations on file for this inspection.

1910.147 C04 II B

Serious Gravity 5 3 instances 3 exposed
Issued
Oct 31, 2018
Abate by
Dec 19, 2018
Penalty
Initial $6,467 · Current $4,000 Reduced
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy:     On or about 10/24/2018, Multipac, Inc., located at 1010 Portwest Drive, St. Charles, MO, did not have specific procedures to control hazardous energy.  The following is a list of equipment which had more than one energy source and required such procedures:   The Wectron 6 Color press (230 V electrics and 40 psi pneumatics;   The Webtron 5 Color press (230 V electrics and 75 psi pneumatics); and   The PCMC 9 Color press (230 V electrics and approximate 75 psi pneumatics).
Recent events (2)
  • — I (S) $4000
  • — Z (S) $6467

1910.147 C06 I

Serious Gravity 5 3 instances 3 exposed
Issued
Oct 31, 2018
Abate by
Dec 19, 2018
Penalty
Initial $6,467 · Current $4,000 Reduced
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:     On or about 10/24/2018, Multipac, Inc., located at 1010 Portwest Drive, St. Charles, MO, did not conduct periodic inspection(s) of their Energy Control (LO/TO) Program.  The last periodic inspection was dated 8/9/11.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $6467

1910.178 P01

Serious Gravity 5 1 instance 37 exposed
Issued
Oct 31, 2018
Abate by
Dec 19, 2018
Penalty
Initial $5,174 · Current $3,000 Reduced
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s):     On or about 10/24/2018, forklift operator(s) at Multipac, Inc., located at 1010 Portwest Drive, St. Charles, MO, were exposed to a forklift in need of repair.  The back-up warning alarm was nonfunctional.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $5174

View Multipac, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343555769.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.