HARRISVILLE, NY —
OSHA Inspection: CIVES CORPORATION DBA VIKING CIVES USA
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of CIVES CORPORATION DBA VIKING CIVES USA in 14331 MILL STREET, HARRISVILLE, NY 13648 (NAICS 333120). OSHA activity number 343580338.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CIVES CORPORATION DBA VIKING CIVES USA
- Site address
- 14331 MILL STREET
- City
- HARRISVILLE
- State
- NY
- ZIP
- 13648
- Mailing
- 14331 MILL STREET, HARRISVILLE, NY 13648
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333120
- Employees
- 100
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.28 B11 II
- Issued
- Apr 16, 2019
- Penalty
- Initial $6,440 · Current $4,830 Reduced
General-duty citation text
29 CFR 1910.28(b)(11)(ii): Each flight of stairs having at least 3 treads and at least 4 risers was not equipped with stair rail systems and handrails as required in Table D-2 of this standard: a) Install Building, on or about 11/2/18: A flight of stairs with five risers did not have a handrail on the open side.
Recent events (2)
- — I (S) $4830
- — Z (S) $6440
1910.107 B05 I
- Issued
- Apr 16, 2019
- Penalty
- Initial $6,440 · Current $4,830 Reduced
General-duty citation text
29 CFR 1910.107(b)(5)(i): There were no visible gauge(s), audible alarm(s) or pressure activated device(s) installed on paint spray booth(s) to indicate or insure that the required air velocity was maintained: a) Blast Paint Department, on or about 11/2/18: Employees spray painting flammable paint and the Overflow Paint Booth did not have a manometer (or equivalent) installed.
Recent events (2)
- — I (S) $4830
- — Z (S) $6440
1910.107 B09
- Issued
- Apr 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(b)(9): A clear space of not less than 3 feet was not kept free from storage on all sides of paint booth(s): a) Blast Paint Department, on or about 11/2/18: Combustible material including but not limited to: cardboard was observed being stored on the top of the paint booth.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Apr 16, 2019
- Penalty
- Initial $4,831 · Current $3,623 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created point of operation, rotating parts, and flying chips: a a) Fab Shop, Work Center 160, on or about 11/2/18: Cleereman Drill Press was not provided with a chuck and tool guard. b) Fab Shop, Work Center 160, on or about 11/2/18: Solberga Drill Press was not provided with a chuck and tool guard.
Recent events (2)
- — I (S) $3623.25
- — Z (S) $4831
1910.215 B09
- Issued
- Apr 16, 2019
- Penalty
- Initial $4,106 · Current $3,080 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Fab Shop, Work Center 160, on or about 11/2/18: A Baldor Bench Grinder had an opening between the tongue guard and grinding wheel that measured 1-inch at the left wheel and 1/2" at the right wheel. b) Fab Shop, Work Center 160, on or about 11/2/18: Black and Decker Bench Grinder had an opening between the tongue guard and grinding wheel that measured 5/8" at the right wheel. c) Install Building, on or about 11/2/18: Jet Equipment 10" Bench Grinder had an opening between the tongue guard and grinding wheel that measured 1/2" at the left wheel.
Recent events (2)
- — I (S) $3079.5
- — Z (S) $4106
1910.242 B
- Issued
- Apr 16, 2019
- Penalty
- Initial $5,474 · Current $4,106 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Fab Shop, Work Center X-8, on or about 11/2/18: Employee used compressed air for cleaning purposes was measured at approximately 100 p.s.i.
Recent events (2)
- — I (S) $4105.5
- — Z (S) $5474
1910.253 B04 III
- Issued
- Apr 16, 2019
- Penalty
- Initial $6,440 · Current $4,830 Reduced
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire resistance rating of at least one-half hour: a) Tank Room, on or about 11/2/18: Compressed gas cylinders: Five Acetylene Tanks and Seven Oxygen Tanks were stored with each other.
Recent events (2)
- — I (S) $4830
- — Z (S) $6440
1910.304 G05
- Issued
- Apr 16, 2019
- Penalty
- Initial $4,106 · Current $3,080 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous and effective: a)Fab Shop, Work Center 140, on or about 11/2/18: Floor fan near Iron Worker had ground pin missing from plug end.
Recent events (2)
- — I (S) $3079.5
- — Z (S) $4106
More inspections in this industry (NAICS 333120)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343580338.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.