CHICOPEE, MA ·
OSHA Inspection: RANDOLPH PRODUCTS, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RANDOLPH PRODUCTS, LLC in 33 HAYNES CIRCLE, CHICOPEE, MA 01020 (NAICS 325510). OSHA activity number 343585360.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RANDOLPH PRODUCTS, LLC
- Site address
- 33 HAYNES CIRCLE
- City
- CHICOPEE
- State
- MA
- ZIP
- 01020
- Mailing
- 33 HAYNES CIRCLE, CHICOPEE, MA 01020
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 325510
- Employees
- 34
- Ownership type
- Private (A)
Citations
10 citations on file for this inspection.
1910.107 G02
- Issued
- Apr 11, 2019
- Abate by
- May 29, 2019
- Penalty
- Initial $3,978 · Current $2,218 Reduced
General-duty citation text
29 CFR 1910.107(g)(2): All spraying areas were not kept as free from the accumulation of deposits of combustible residues as practical, with cleaning conducted daily if necessary: Randolph Products, LLC, 33 Haynes Circle, Chicopee, Massachusetts; On and before November 7, 2019, the interior of the spray booth was not kept as free of accumulation of deposits of combustible residues as practical.
Recent events (2)
- · I (S) $2218
- · Z (S) $3978
1910.307 C02 I
- Issued
- Apr 11, 2019
- Abate by
- May 29, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.307(c)(2)(i): Equipment in hazardous (classified) location(s) was not approved for the class of location: Randolph Products, LLC, 33 Haynes Circle, Chicopee, Massachusetts; On and before November 7, 2019, electrical outlets on the paint booth and the paint mixing area were not approved for the class of location. The area around the paint booth and paint mixing area is a Class 1 zone 1 location where ignitable concentrations of flammable gases or vapors are likely to exist under normal operating conditions.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.179 J02 I
- Issued
- Apr 11, 2019
- Penalty
- Initial $6,630 · Current $3,930 Reduced
General-duty citation text
29 CFR 1910.179(j)(2)(i): Hoisting equipment was not inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, including observation during operation for any defects which might appear between regular inspections: Randolph Products, LLC, 33 Haynes Circle, Chicopee, Massachusetts; On and before November 7, 2018 the hoist in the maintenance area was not checked daily or prior to use to ensure there were no defects that would expose employees to safety hazards while operating the hoist. The hoist was attached to the roof support with a nylon strap which had no visible markings to indicate the load rating.
Recent events (2)
- · I (S) $3930
- · Z (S) $6630
1910.184 D
- Issued
- Apr 11, 2019
- Penalty
- Initial $5,304 · Current $3,004 Reduced
General-duty citation text
29 CFR 1910.184(d): Sling(s) and fastenings were not inspected each day or during use and were not removed from service when damaged or defective: Randolph Products, LLC, 33 Haynes Circle, Chicopee, Massachusetts; On and before November 7, 2018 the synthetic sling used to support the hoist was not inspected for damage daily prior to use.
Recent events (2)
- · I (S) $3004
- · Z (S) $5304
1910.184 I01
- Issued
- Apr 11, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(i)(1): Synthetic web sling(s) were not marked or coded to show rated capacities for each type of hitch and type of synthetic web material: Randolph Products, LLC, 33 Haynes Circle, Chicopee, Massachusetts; On and before November 7, 2018 the synthetic sling used to support the hoist did not have visible markings to indicate the capacities of the sling.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.184 I03 II
- Issued
- Apr 11, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(i)(3)(ii): Slings were not attached where they were free of all sharp edges that could in any way damage the webbing. Randolph Products, LLC, 33 Haynes Circle, Chicopee, Massachusetts; On and before November 7, 2018 the synthetic sling used to support the hoist was wrapped around the metal roof supports and exposed to sharp edges that could damage the webbing.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.212 A01
- Issued
- Apr 11, 2019
- Penalty
- Initial $6,630 · Current $3,930 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Randolph Products, LLC, 33 Haynes Circle, Chicopee, Massachusetts; On and before November 7, 2018, equipment in the maintenance area was used without the proper guarding. a. employees used the Jet drill press without a guard to protect employees from rotating parts, flying chips, and sparks. b. Unused portions of the blade of the horizontal band saw were not guarded to prevent accidental contact.
Recent events (2)
- · I (S) $3930
- · Z (S) $6630
1910.303 B02
- Issued
- Apr 11, 2019
- Abate by
- May 29, 2019
- Penalty
- Initial $5,304 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: Randolph Products, LLC, 33 Haynes Circle, Chicopee, Massachusetts; On and before November 7, 2018, electrical equipment was used outside the listing and labeling for the equipment. a. Relocatable power tap used in the breakroom to power an air conditioning unit above the Coke vending machines. b. Value Craft 8070 5 speed drill presses not designed for use with flammable materials are used to mix flammable paints.
Recent events (2)
- · I (O) $0
- · Z (S) $5304
1910.304 G05
- Issued
- Apr 11, 2019
- Abate by
- May 29, 2019
- Penalty
- Initial $6,630 · Current $3,930 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: Randolph Products, LLC, 33 Haynes Circle, Chicopee, Massachusetts; On and before November 7, 2018, employees were exposed to electric shock hazards while using a battery charger that did not have a ground pin.
Recent events (2)
- · I (S) $3930
- · Z (S) $6630
1910.305 G01 IV A
- Issued
- Apr 11, 2019
- Abate by
- May 29, 2019
- Penalty
- Initial $3,978 · Current $2,218 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: Randolph Products, LLC, 33 Haynes Circle, Chicopee, Massachusetts; On and before November 7, 2018, the employer was using an extension cord to power a dock light and reciprocating saw. The cord for the dock light would not reach the outlet without an extension cord.
Recent events (2)
- · I (S) $2218
- · Z (S) $3978
More inspections at Randolph Products, LLC
View Randolph Products, LLC's full OSHA safety record →
More inspections in this industry (NAICS 325510)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343585360.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.